Plasterers it’s your job!!

[Cadgey123]

I remember when trades were nice to each other on site and looked out for their fellow comrades.
Yes there is a single box that needs to be used beneath that finishing plaster.

They would plaster round a window to a good standard, so why not a socket box neatly

 

[kingeri]

It's just pure laziness. Easier to get a good finish by just going over the top, not his problem is it?

 

[Octopus]

At least you can see it.

Had that done to me recently - the plasterer had some making good to do as I didn't find it as easily.

 

[Pete999]

I remember when trades were nice to each other on site and looked out for their fellow comrades.
Yes there is a single box that needs to be used beneath that finishing plaster.

They would plaster round a window to a good standard, so why not a socket box neatly

View attachment 38744

Not hard to find is it?

 

[Cadgey123]

At least you can see it.

Had that done to me recently - the plasterer had some making good to do as I didn't find it as easily.

Yeah I will do my best to get it out safely, but won’t be fussed about any damage.

 

[Cadgey123]

So you

Not hard to find is it?[/QUOTE

Of c

Not hard to find is it?

Of course it’s not hard, it’s marked on the drawing as well.
Are you saying it’s acceptable? It’s pure laziness by other trades!!

 

[telectrix]

just cut it with multitool.

 

[Pete999]

just cut it with multitool.

Or a hammer

 

[Cadgey123]

just cut it with multitool.

 

[Cadgey123]

Beta

Or a hammer

Beat me to it

 

[telectrix]

Or a hammer

now now pete. plasterers are human semi-human too.

 

[Dave Jenkins]

Nowadays I always say to customers that I'll damage plasterwork where the job entails chasing out adding I'm an electrician not a plasterer. I do my best to make good of course but.....

 

[Andy78]

Yeah I will do my best to get it out safely, but won’t be fussed about any damage.

I estimate it will take you roughly 28 hammer blows over an area of 4 square metres to find it successfully

 

[buzzlightyear]

was the room full of mist when you took the picture with a brownie camera!

 

[Sparky Pat]

My Father once had issues with plasterers who thought it was a great joke to plaster over boxes so that they could not be seen. Knowing that a box had been deliberately plastered over he drew a line across the wall at the center height of the box, then with his lump hammer and bolster chipped his way out from the corner till he found the box. Plasterers then had to repair the damage, they did not do it again.