Power for Pond pump and multiple external lights. | on ElectriciansForums

Discuss Power for Pond pump and multiple external lights. in the UK Electrical Forum area at ElectriciansForums.net

paulw

-
Joined
Jun 20, 2017
Messages
5
Reaction score
0
Location
uk
Evening all, just wanted to run a customers ideas by you and if my thoughts are correct with regards to wiring.
Customer is having his garden landscaped and is looking to install 3/4 standalone lights, as well as a pond pump with its own mini lighting system for the water feature.
My thoughts were:-
2.5mm swa to external double socket for the pump and water feature lighting (protected by 6amp plug), taken from RCD house ring main via a fused spur for switching.
1.5mm swa for new radial to standalone garden lights around garden edging, taken from rcd protected lighting circuit in the house.
Any thoughts or suggestions would be good.
 
My thoughts too, although CU is dead centre of a relative new build and customer is wanting to avoid that additional work if possible (house designed to his spec). It has a few spares for two new circuits too which would have been ideal. My thoughts were with the external pump and feature lights being via a fused spur, the worst case is the standalone lights knocking out the downstairs lighting?
 
or alternatively, could i also use a spur as a means of isolation for the external lighting to also protect the internal circuit from any potential external fault?
 
or alternatively, could i also use a spur as a means of isolation for the external lighting to also protect the internal circuit from any potential external fault?

If its a relatively new build, then the circuit you spur from will be RCD protected, so a fault on the outside circuit(s) will trip the internal RCD and disconnect anything on that RCD. Use a double pole FCU, and then you can isolate the outside if needs be.

Consider a garden switch box, maybe a remote controlled one (Blagdon/Wisebox). That makes the switchery easier.
 

Reply to Power for Pond pump and multiple external lights. in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
268
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
762
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
755

Similar threads

Well yes obviously, but if the transformer is indoors and your lights are 50m down the garden then it's very easy to need pretty big cables at...
    • Like
2 3
Replies
42
Views
2K
Adding a led strip isn't going to make much difference to the 3 phase balance. No real difference to where a 3 phase machine uses one phase to...
Replies
2
Views
310

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top