qualifaction meanings and requirments | Page 2 | on ElectriciansForums
  • Thread starter Graham Coughlan
  • Start date
  • Replies 33
  • Views 5K

Discuss qualifaction meanings and requirments in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

G

Graham Coughlan

Hey guys

A few questions about the 2391 and the eal inspection and testing course level3.

Been on the EAL course for a year now and soon to finish it. I assumed it held the same weight as the 2391 but ive now been told i still have to do that course after this one!

So does this course fron EAL hold no weight or can i use this course instead or the other one considering it covers the same.

Its getting a bit depressing now because its becoming really hard to find an electrical job and its so confusing with all these courses :(

Could someone please explain these to me

Cheers
 
With the amount of work around I don't think they're going to be hunting around for months or even hours for someone to fill a position.
As I said if every training provider will only accept enrolment applications for 17th edition from people who already have a 'full' course such as 236, 2360, 2330, 2357 or equivalent, then asking for someone with a current regs qualification will ensure they have a technical certificate of some description, and be reasonably up to date.
 
Upvote 0
With the amount of work around I don't think they're going to be hunting around for months or even hours for someone to fill a position.
As I said if every training provider will only accept enrolment applications for 17th edition from people who already have a 'full' course such as 236, 2360, 2330, 2357 or equivalent, then asking for someone with a current regs qualification will ensure they have a technical certificate of some description, and be reasonably up to date.

Quote....
then asking for someone with a current regs qualification will ensure they have a technical certificate of some description, and be reasonably up to date. unquote will it though?? You dont have to be an experienced electrician to have the 17th Edition Qualification do you.in reality you dont have to know anything about Electrics but can still pass the course..and as I said on the flip side of that you may have an experienced electrician who for whatever reason does not have the 17th edition...who could be put off from applying for the job simply because he/she isnt 17th edition,, yet would be more than capable of doing the job...I agree with what you say about the amount of work that is around,,,but the point I was trying to make is,, if the recruiter didnt put that stipulation on the vacancy they would probably fill the vacancy even quicker...the other point being that why put a stipulation of a certain qualification on a job that does not need that particular qualification.....dont see the point in it,, unless they just do it as a blanket thing becaue they dont know any better?? just my thoughts on it...
 
Upvote 0
... then asking for someone with a current regs qualification will ensure they have a technical certificate of some description, and be reasonably up to date.

will it though??


Yes it will...

if every training provider will only accept enrolment applications for 17th edition from people who already have a 'full' course such as 236, 2360, 2330, 2357 or equivalent,

With the amount of work around I don't think they're going to be hunting around for months or even hours for someone to fill a position - they don't need to fill positions any quicker.
 
Upvote 0
Which leads me on to another point,,,,as I am now near leaving the service and looking to get back into the trade/indusryobvioulsy I am looking at jobs that are advertised,, and I am wondering if these employment agencies and indeed in some cases companies that are looking to employ an electrician or a Maintenance Electrician,,, they do seem to expect every Electrician to be 2391 qualified, why? Surely a large company is the registered body and not every single electrician in their employ needs to be 2391,, Seems to me that these agencies and some non electrical companies that want to recruit an electrician to their maintenance teams do not really understand the puprpose of Part P, 2391 and 2392 qualifications and even to some extent the 17th edition, as they are not always relevant to the individuals role/job...and as said mean nothing unless you are registered..they see it as just another electrical qualification and then insist on everyone having it,,,when they really do not understand what its all about...

Your thoughts please...

I think it is partly to help with the shortlist of the recruitment agency/HR staff, due to the sheer number of applicants chasing every job, so by setting the bar at 2391 this cuts the numbers down.

Also some jobs are 'multi-skilled', the catch all for paying you installers wages, and expecting you to work above what they are willing to pay you.
 
Upvote 0
Yes it will...


With the amount of work around I don't think they're going to be hunting around for months or even hours for someone to fill a position - they don't need to fill positions any quicker.

well no actually it does not,, I have just recently back in April done the 17th edition on the same course as me were people who had never worked as a electrician,,,they ALL passed the 17th edition exam,,,,,ask them to wire a Lighting circuit with a few 2 way switches and an intermediate switch in it they wouldnt have a clue where to start,,,,,not all training providers insist on you having previous experience or any other electrical qualifications,,,,Back in Mid May I did the Inspection and testing again on that course there were guys who had not done the 17th a couple had done the DEI Course but that was it,,,,having the 17th and or previous experience was a suggestion not a pre-requisit....had it of been I could agree with you....but it aint the case...not a hard and fast rule it seems,,,probably should be in all cases,, but sadly it aint..
 
Upvote 0
I think it is partly to help with the shortlist of the recruitment agency/HR staff, due to the sheer number of applicants chasing every job, so by setting the bar at 2391 this cuts the numbers down.

Also some jobs are 'multi-skilled', the catch all for paying you installers wages, and expecting you to work above what they are willing to pay you.

Hi yeh that would make sense,,,does nothing for the individual though eh....thanks for your reply..
 
Upvote 0
well no actually it does not,, I have just recently back in April done the 17th edition on the same course as me were people who had never worked as a electrician,,,they ALL passed the 17th edition exam,,,,,ask them to wire a Lighting circuit with a few 2 way switches and an intermediate switch in it they wouldnt have a clue where to start,,,,,not all training providers insist on you having previous experience or any other electrical qualifications,,,,Back in Mid May I did the Inspection and testing again on that course there were guys who had not done the 17th a couple had done the DEI Course but that was it,,,,having the 17th and or previous experience was a suggestion not a pre-requisit....had it of been I could agree with you....but it aint the case...not a hard and fast rule it seems,,,probably should be in all cases,, but sadly it aint..
I never said they did.
I said IF they did...
 
Upvote 0
..............in respect of certificating your or others work, in short You HAVE TO BE REGISTERED...

Sorry but that statement is incorrect , no you dont.
To carry out domestic electrical work that is notifiable being in a part p scheme allows you to self-notify at a reduced cost.
Testing and inspecting in itself is not notifiable work and you dont need to be registered with anyone to do it , you just need to be competent.
Building regs notification and electrical certification are seperate elements , which is where i think youre getting mixed up.
 
Upvote 0
Sorry but that statement is incorrect , no you dont.
To carry out domestic electrical work that is notifiable being in a part p scheme allows you to self-notify at a reduced cost.
Testing and inspecting in itself is not notifiable work and you dont need to be registered with anyone to do it , you just need to be competent.
Building regs notification and electrical certification are seperate elements , which is where i think youre getting mixed up.

Yes in respect of minor works and Part P stuff..reports etc,...But Ive just done the course and on the forms we used, which I believe are the new type of forms that are yet to come out,,,,there is a section on the NEW FORMS where you as the inspector have to put in what type of tester was used, its calibration date and if I remember correctly the calibratin certificate number,,,and also what Organisation you are a member of as in NICEIC, ECA etc, etc, and your registration/membership Number,,,,I think this has been done probably because as it stands anyone could sign the forms and who is to know if they are competent or not, or 2391 qualified or not....the forms are then sent to whoever you are registered with and then they send them or inform the Local Authority,,,which inturm validates the Certificate.....This is in respect of New Installations,, as in the Electrical Installation Certificate,,,,not the case as the moment as you say,,,but I can only tell you what we were told and shown on the course I did,,,,something for the future methinks,,,,balls ache I know,,just something else that will sooner or later be put upon us...yes more red tape no doubt...and we were definatley told that to sign off work you have to be registered with one of the organisations NICEIC, ECA, ELECSA, NAPIT,,,now if thats not true then I for one would like to know why we were told that,, because as you probably know to get registered you have to be able to have jobs available for inspection (x3) by those organisations never mind the ÂŁ300 -ÂŁ400 it costs to get registered. When I worked last on the tools as an electrician there was none of this and the only organisation then was the NICEIC and I have on many occassions gone around with one of their inspectors checking out our jobs so that we could stay registered,, and to do work say on local authority stuff, schools, hospitals etc, etc, you had to be a registered contractor...
 
Upvote 0
Firstly , the box printed on electrical certificates asking if youre a scheme member has always been there , its nothing new and its optional anyway.

Secondly , being registered with the nic doesnt prove your competent at testing , it just proves youre willing to hand over ÂŁ500 a year just to drive round with their stickers on the side of your van.

Thirdly , for the last 5 years i've been carrying out inspections on a freelance basis , not registered with anyone ,
and this includes doing commercial PIR's on hotels etc. requested by the local council whom have always accepted my certificates.

Under EU law the labour market is open to anyone without restrictions - dont believe all the crap thats out there.
 
Upvote 0
Firstly , the box printed on electrical certificates asking if youre a scheme member has always been there , its nothing new and its optional anyway.

Secondly , being registered with the nic doesnt prove your competent at testing , it just proves youre willing to hand over ÂŁ500 a year just to drive round with their stickers on the side of your van.

Thirdly , for the last 5 years i've been carrying out inspections on a freelance basis , not registered with anyone ,
and this includes doing commercial PIR's on hotels etc. requested by the local council whom have always accepted my certificates.

Under EU law the labour market is open to anyone without restrictions - dont believe all the crap thats out there.

Mate I dont doubt what you are saying,, but I am only saying what we were told on the 2391 course that I did what 3 weeks ago now and the forms they had us using,,,,(look at the Minor Works Certificate) in discussion about all this on the course it is thought that all this is coming about for two reasons mainly,,,1. its another way of raising revenue, 2, they have cottoned on to the fact that there are people out there signing off work as a competent person,,,but what they are saying now is,, who says they are competent? was it you or someone else who said that you dont need 2391 to sign off work? well what they are saying now is you can (or will be) only be able to sign off work if you are a registered member of the NICEIC, ECA, NAPIT, etc, etc, and to be registered with one of them you have to have passed the the 2391 course and exam..supply your quals and certs and they inspect your work and test equipment (as you probably know)..then you can be rated as competent,,,because as it stands, anyone your grannie could sign the forms,,,and that is what they are looking to do, to stop just anyone signing the forms,,,Ok It's not come in yet,,but the feeling is that it will in the near future....If you look through the threads on here someone, one of the admins I think has put a list on here of the Available Organisations as in NICEIC, ECA, NAPIT, etc, etc, that you can join and become registered with,, and he clearly ends it in,, which is what you need to be able to sign off your own work,,,now if its there for your own work,,,makes sense realy to realise that it wont be long before you have to be registered as a competent person to sign off other peoples work as well as your own,,,at the moment its like a loop hole if you like,, and one that they will do their damdest to fill especialy if they can make money from it...yes at our expense...

Do I agree with it ?? No not really,, but I can see the reason behind it,,,and why they will bring it in....

Hell when I started out in the trade back in the 70's you never had any of this crap,,,,if you did a new build or a rewire you completed a form that was called and Installation Completion Form,,,the local electricity boards inspector came out had a look around,check your bonding etc,etc, tested your work,,(of course you would have tested it first) ,if it passed then he connected it up,,,,job done..and anyone could sign the form..
 
Upvote 0
I phoned the nic the other day, asked them what i needed to get my part p sorted. The guy told me if iv got the 17th i can apply, later on in 2012 you will need nvq 3 to apply so i dont understand why you think you need 2391 to register, because ive spoke to them the other day and its not what they said.....iv just done my 2330 level 3 got a bit of experience so im not pretending to now it all because ive got a long way to go.!!! to be any good that is..but when you need to now about the nic , you need to just phone them !!!! seems to me that anyone can get part p because anyone can get the 17th. Im looking to do the 2391 this year, i dont really now why i need it, what it really is.! Whats the difference between part p and 2391? I now its a testing qual obvious, but what will it allow my to do ?
 
Upvote 0
I phoned the nic the other day, asked them what i needed to get my part p sorted. The guy told me if iv got the 17th i can apply, later on in 2012 you will need nvq 3 to apply so i dont understand why you think you need 2391 to register, because ive spoke to them the other day and its not what they said.....iv just done my 2330 level 3 got a bit of experience so im not pretending to now it all because ive got a long way to go.!!! to be any good that is..but when you need to now about the nic , you need to just phone them !!!! seems to me that anyone can get part p because anyone can get the 17th. Im looking to do the 2391 this year, i dont really now why i need it, what it really is.! Whats the difference between part p and 2391? I now its a testing qual obvious, but what will it allow my to do ?


Right Firstly can I stop you right there,,its not me thats saying that you must have the 2391,,,as it stands at the moment as many on here will agree you dont,,,,and thats the problem,, I have just 3 weeks ago done the 2391 course and exam,, I have to wait 4 -6 weks to get my results,, si I dont know if I have the Qualification or not as yet , I may have to go back for a re-sit or a re test on the practical bit,, I dont know,, what I am saying is, on the course in discussions it is felt by those in the know,,,that in the future in order to become registered on one of the existing schemes, one of the requirements in respect of testing and inspection as a competent person and being registered is that you will have have to of done the 2391 course and the exam and possess the qualification,,,so that you can sign off work,, thats how they reckon it will go,, its not at the moment, but they reckon thats how it will be in the future, at a guess I would say they will bring it in as and when and if they go to the 18th edition or something like that,,,I dont know...

Part P and 2391 whats the difference,,,,well as I understand it and I am PART P Qualified/Competent,,,,,Part P means that you can sign off your OWN work,,, and your own work only,,,,likewise with the 2392 qualification,, own work only,,,,,whereas with the 2391 you can sign off not only your own work but other peoples work aswell, and carry out Inspection and Testing and Certification of Electrical Installations......On my Part P course we were told that you had to be registered on one of the schemes to be able to sign off your work,, like wise with the 2391/2392,,,,but as we are reminded on here more and more many are saying that that is not the case and you do not have to be registered,,,,so if that is the case why are all having to do all these courses and exams to get a qualification that we apparently do NOT need to sign off work,,,,,I for one now would like some official clarification on this,,, because these courses and exam fee's are not cheap and niether are the registration fee's as well as time consuming....I think what they are and will be playing on is the competent person bit,,,,at the moment all you need to be is a competent person,,,,it would appear that what the powers that be are saying is,,,Who says you are a competent person? I have no doubt that they are doing it for their own financial gain,,,

I do feel now its time that we had some real proper and official enlightenment on all this,,,or is it just one big rip off????? I dont know..and I can only say what we were told on my course and by our particular Trainer.
 
Upvote 0
i dont believe 2391 makes you competent in a court...ive heard of a court case where the court didnt recognise 2391 as competent but recognised this guys fathers quals,,(degree.)
 
Upvote 0

Reply to qualifaction meanings and requirments in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
401
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
989
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Article
Tiling Courses at UK Pro Tiling Training Hi all Darren here from NETT, Just heard about Diamond and a few other Tiling companies in trouble, I...
Replies
0
Views
257
  • Question
You want to upgrade your 2330 level 3 (don’t worry about -7 or -10, it’s probably just a typo) to the 2357. There are two options, the “adult...
Replies
4
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top