rccd test

[L1Jay1]

Why would a rccd fail straight away after pressing the button on tester ,

 

[westward10]

Welcome to the forum. Can you give a bit more info as to how you are testing the device.

 

[Bobster]

What test were you doing?
What do you mean by fail?

Need a little bit more information from you to give a decent answer.

 

[L1Jay1]

It comes up as fail on kewtech meter, before performing any of the tests

 

[Pete999]

What function is your Tester set on?

 

[Bobster]

It comes up as fail on kewtech meter, before performing any of the tests

What model of meter, how have you connected the test leads, what sort of RCCB is it?

Easier for us to give a concise answer if we aren't spoon fed information.

Give as much as you can.

 

[L1Jay1]

It’s set on 30mA auto

 

[Pete999]

It’s set on 30mA auto

Thanks what mA is the RCD you are testing, are the loads still connected??

 

[L1Jay1]

It’s an rccd in a Crabtree consumer unit

 

[Pete999]

It’s an rccd in a Crabtree consumer unit

Is it a 30mA RCCD?

 

[westward10]

Jay we been to know the meter make and model, is it an rcbo or rcd main switch and whether the fail is immediate and what does the meter indicate.

 

[L1Jay1]

It thought it might be cause some of the loads where still connected, but when testing a rcd , u can normally still carry out the test with loads still connected.

 

[L1Jay1]

30 mA rccd and the fail was immediate

 

[westward10]

Isolate the loads and outgoing neutrals and retry.

 

[goasis]

Pulling teeth here.....
So the mft is on auto, so has the test started and failed on the 1/2 test?
Polarity incorrect?