RCD Test Results

[Spark2020]

When testing (30ma RCD) to (BSEN-61008), am I correct In thinking you record the lowest values & not the highest value reading obtained @ x 5 In, for the schedule of test results, for example.

X 1/2 In-No trip
X 1 In-0-180-Under 300-ms
X 5 In-0-180-Under 40-ms
Check test button for operational purposes

Thanks in advance, sorry if sounds daft, I've only just started posting on the forum, I think I've cracked it but not 100% sure on this cheers.

 

[westward10]

You always record the highest value. The question is not daft ask whatever you wish that is the purpose of the trainee forum.

 

[Spark2020]

You always record the highest value.

You always record the highest value.

Thanks Westward,

You always record the highest value. The question is not daft ask whatever you wish that is the purpose of the trainee forum.

Thanks westward10, I've got it now just wasn't 100% sure on this cheers.

You always record the highest value. The question is not daft ask whatever you wish that is the purpose of the trainee forum.

Thanks westward10, I've got it now just wasn't 100% sure on this cheers

 

[telectrix]

Thanks westward10, I've got it now just wasn't 100% sure on this cheers

you are now. .the higher values being the worst case. same as in PSCC.

 

[Spark2020]

you are now. .the higher values being the worst case. same as in PSCC.

Cheers I will remember that, always the highest values being the worst

 

[telectrix]

grammar police intervention. if 2 values it's lower and higher. if more than 2 it's highest and lowest. like if you have 2 kids. older and younger, not oldest and youngest. i'll get my coat now. (before some smartarse says his kids are twins. .)