Renovating a double decker help needed

[Staceyturley]

Evening all, bit of a strange one I'm renovating a double decker bus and tonight went to check on the elections work and noticed there all bends in the cables and twisted for the lights and sockets am I right in thinking their shouldnt be as it can short and be dangerous I have rang him and he's said it's all fine and will be signed off just looking for some reassurance as this will be a 2nd home for me and my children any help appreciated

 

[DPG]

Interesting idea! Can you post some pictures of the wiring. And the bus!

 

[Staceyturley]

Interesting idea! Can you post some pictures of the wiring. And the bus!

Hey dpg this is some I will take some more as it was dark the cladding is what I've done today but now panicking as he's cable tied some of the wires to the railings and will always be exposed
[automerge]1574372406[/automerge]

Hey dpg this is some I will take some more as it was dark the cladding is what I've done today but now panicking as he's cable tied some of the wires to the railings and will always be exposed

These are just upstairs so far as working my way down

 

[DPG]

Looking interesting that. Yeah post some more pictures showing the twisted wiring you are concerned about.

Is the consumer unit in yet?

 

[Staceyturley]

Looking interesting that. Yeah post some more pictures showing the twisted wiring you are concerned about.

Is the consumer unit in yet?

Yes the switch board has been done today and i will do be going down there after I've dropped the kids off at school

 

[DPG]

Get some pictures posted and I'm sure people will give their opinions.

 

[Staceyturley]

Get some pictures posted and I'm sure people will give their opinions.

Thank u so much will do tomorrow x

 

[Sintra]

Hi Stacey is this bus going to be mobile or static as this makes a difference to the type of wiring that can be used.

 

[Staceyturley]

Hi Stacey is this bus going to be mobile or static as this makes a difference to the type of wiring that can be used.

Hey it's going to be static after I've moved it from where I'm working on it x

 

[Sintra]

Hey it's going to be static after I've moved it from where I'm working on it x

Glad to hear that after looking at the pics.

 

[Staceyturley]

Why do u say that? Is there something wrong with the electrics or the way I've done it as it will be driven to its final destination when I've finished and that's a few 100 miles

 

[Sintra]

On mobile units you need to consider the vibration when moving. This generally means that you need to use a cable with fine flexible cores rather than solid cores.

 

[littlespark]

Sounds like this is no different to a static caravan which is made in one place and transported to a site. They use solid core t&e whereas a touring caravan uses flex

 

[Staceyturley]

That makes sense now thank you so much started to really panic then for a minute

 

[littlespark]

I didn’t think it was going to be used as a mobile home. A lot of caravan sites have height restriction beams, and a double decker bus would be tricky to get in.

Is there a reason the internal walls are made from quite heavy and thick wood?
Static caravans for example are maybe only 1” square frame and thin plywood.