Rotary Isolator with enough space

[Eric12]

Hi i have a hot tub job coming up and will need a rotary isolator. I need to bring two 6mm swa's (single phase) into its base and will use pirahhna earth nuts. I know these isolators dont have much room inside em, the larger 63a units (at least the ones I can find) have 25mm knockouts so no good. Anyone know of any 63a rotary isoaltors with 20mm knockouts, or no knockouts atall ?

I remember a job from a while ago wiring an isolator for heat curtain/ air-con and had a real real struggle getting the aromours due to lack of space !

 

[mattg4321]

Rotary Isolator 4 Pole

EC947 UL approved. With 2x 25mm knock-outs.4 Pole IP65 (weatherproof) 440V - 50Hz ABS polycarbonate enclosurePadlock facility to prevent the switch being used by unauthorised personsBS EN60947 IEC947-1-3, CSA, RU, UL, CE

www.toolstation.com

Europa ones surprisingly. 40a upwards are larger body and quite good quality. Can be drilled to 20 or 25mm

 

[MJPD29]

Fitted Europa 63a today with 2 x 5 core 10mm swa. No knockouts, can be drilled to any size. Seemed decent quality, enough room to terminate comfortably

 

[Eric12]

Can be drilled to 20 or 25mm

Ah thanks there matt, I assumed those drillable knockouts were 25mm, I cannot see from the pic and the specs dont say. Thanks I will visit tomorrow and take a look,

 

[Eric12]

Fitted Europa 63a today with 2 x 5 core 10mm swa. No knockouts, can be drilled to any size. Seemed decent quality, enough room to terminate comfortably

Thanks Matthew, where did you get the Europa isolators from ? The post before yours (#2) mentions europa isolators but the associated pic shows knockouts ???

 

[MJPD29]

I had another one in the van so I attached a picture. They are not knockouts, more of a template for 20/25/32mm. Can be drilled to any size. We don't have toolstation here it's from greenville electrical

 

[Eric12]

I had another one in the van so I attached a picture. They are not knockouts, more of a template for 20/25/32mm. Can be drilled to any size. We don't have toolstation here it's from greenville electrical

Okay great stuff thanks

 

[123]

Another vote for the Europa ones, ample amount of room in them and they don't have knockouts, they need to be drilled