Signed certs that are filled in badly | Page 3 | on ElectriciansForums

Discuss Signed certs that are filled in badly in the Commercial Electrical Advice area at ElectriciansForums.net

If it's your first job as qs the inspector will be more interested in your knowledge and how you assess your men( site ordits etc ) if you can show that you are competent then you should not have to many issues or have they ask to look at reports from the last 3 years
 
I have spoken the NIC and they are saying the same thing Flanders. The company are worried they will lose their accreditation
 
I have spoken the NIC and they are saying the same thing Flanders. The company are worried they will lose their accreditation
Are you doing the PDH job as well ?.
am getting the feeling that the PDH likes to move a lot! When he drew up budgets for jobs he would go off spec and miss a lot off.
Am I to assume you are referring to the project manager here ?.As long as it conforms to BS7671 then the above in not in the PDH remit eg the spec might say 20 watt LED and 15 watt is fitted is irrelevant.
 
Are you doing the PDH job as well ?.
Am I to assume you are referring to the project manager here ?.As long as it conforms to BS7671 then the above in not in the PDH remit eg the spec might say 20 watt LED and 15 watt is fitted is irrelevant.

He was basically the electrical guy for the company at the start. So he had a hand in all aspects, but his primary role was PDH. The company is newish to the electrical side in terms of keeping it in house and not subbed out.

It just bothers me as I have not been exposed to this sort of stuff before.
 
He was basically the electrical guy for the company at the start. So he had a hand in all aspects, but his primary role was PDH. The company is newish to the electrical side in terms of keeping it in house and not subbed out.

It just bothers me as I have not been exposed to this sort of stuff before.
So you had a electrical project manager ,A PDH and the Q.S ? you keep on referring to ''he'' .
 
Is the company you work for, giving you the time, support etc or are they like some, paying lip service, and Ant will know what I'm talking about, to carry out QS duties, or is "He" just passing the buck onto your shoulders?
 
We had one of each, but the PDH did a little PM too. As some of the jobs we small scale he quoted and arranged installs too
 
Is the company you work for, giving you the time, support etc or are they like some, paying lip service, and Ant will know what I'm talking about, to carry out QS duties, or is "He" just passing the buck onto your shoulders?
Giving me time it seems, but their immediate problem is the assessment in 3 weeks time.
 
Is the company you work for, giving you the time, support etc or are they like some, paying lip service, and Ant will know what I'm talking about, to carry out QS duties, or is "He" just passing the buck onto your shoulders?
Yes I was that token gesture ,making s....t shine and polishing the t....d.
 
It shouldn't cost more to do it right first time. It's when you can't get the lads to do the basics because your M.D. not supporting you and not letting them do it right.
 
New DB board and updating of 2 addition DB boards
I will be honest with you with the information on the certificate & the work you have installed new DB boards & the guys on-site either could not be bothered to look or ask someone about the gas connection alone, also I take it the certificate has been passed over as a finished job then I think you might be in for a bumpy ride in three weeks time. not your work just that certificate & may be more like it.
you can have a s..t looking job but as long as the paperwork looks good & the results are pretty equal to the work carried then you would be okay.
I mean the new DB'S came from something surely even putting these figures in would be better than NV
 

Reply to Signed certs that are filled in badly in the Commercial Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
244
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
717
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
686

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top