Socket height regulation in old home | Page 3 | on ElectriciansForums

Discuss Socket height regulation in old home in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Given that the great majority of items requiring to be plugged into a socket are generally used higher up that the floor - computers, radios, TVs, stereo sets, Satellite, electric clock radios, etc. I think it would make more sense to set an "optimum" level for sockets, say 1000mm or thereabouts. Low sockets as someone has already pointed out are difficult for not only the elderly but also anyone with a mobility issue - I for example recently tore all the ligaments in one knee and you would not imagine what an impact that has for reaching down and bending over even now some three months afterwards.

Higher level sockets would also remove the problems with small children poking things in.

Assuming also that the cables are run in the ceiling void there would also financial savings to be gained as well as associated environmental benefits.

Just me or do others agree ?
You need to speak to a wheelchair user.
 
hey ho, hey ho, it's off to work we go'
with a shovel and a pick and a hairy dick, hey ho, hey ho, hey ho.
 
I recently fitted some sockets in the actual skirting board with the backbox recessed in the wall behind, made good use of the multi tool, feeding cables down behind skirting board to cavity under floor. the skirting was 25cm high, was in a grade 1 listed property. deepest skirting board was just over a foot deep going up stairs and landings, that was on in a old private school building that was being converted to flats.
Surprised you got away with that, that's the textbook definition of "new dwelling" on a change of use for part m compliance. Did you have to get that approved by the building inspector specifically?
 
Thanks all! Common sense not applied in our basement (all socksts ridicously high ) and was told it was regulation. Wanted to be sure when passing on advise to clients as I am an.interior designer. Thanks again!

View attachment 42920

The Building regulations have been compiled by interested parties after long consideration
Although there are parts that I dispute as not being suitable,they are not meant to be "pick and choose" what suits

The regulations are compulsory for all dwellings,the only difference is older properties being extended can be exempted from specific requirements

If you are going to give advice to future clients,maybe it should be that heights can sometimes be modified away from what is considered the minimum

It may not be wise to refer to the minimum height as ridiculous,you could be slapped on the wrist for being naughty
 
I have a 13 year old, he is bigger than me already! I said a few years back "The day you can beat me in an arm wrestle I'll give you ÂŁ100" he was a skinny little thing at the time so I thought it will be a while before I have to shell out some cash. Hmmm... we had an arm wrestle on Friday and it took all my strength to beat him. Obviously I pretended it was easy :tongueout:, kids seem to be so big these days!

My 13 year old lad is nearly as tall as me.... I'm 5ft 11.5 inches.... (Yes the .5 inches is important, as I used to be 6 ft and lost .5 inch somewhere.... :cry::cry:)
Luckily he doesn't have the strength of me, or I would be in trouble, as I'm always winding him up...
 
I used to be 6 ft and lost .5 inch somewhere.

silly bugger. you had your hair cut.
 
My 13 year old lad is nearly as tall as me.... I'm 5ft 11.5 inches.... (Yes the .5 inches is important, as I used to be 6 ft and lost .5 inch somewhere.... :cry::cry:)
Luckily he doesn't have the strength of me, or I would be in trouble, as I'm always winding him up...
Oh, he will have, then enjoy enacting his revenge ...
 

Reply to Socket height regulation in old home in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
953
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

This situation is not uncommon and is absolutely nothing to lose sleep over. There are plenty of properties sold without the 'required' electrical...
Replies
5
Views
725
i am looking at outdoor security lights, hard wired with PIR sensors but there are so many options .. any suggestion on brand or what to get would...
2
Replies
19
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top