I am a retired Electrician and started looking at Solar Power, (Black Magic to me),
after much reading of "How To", I decided to build myself a system, bat as I don't
have a roof, I live in a ground flat, I decided to build a portable unit, I get the sun
in the living room in the morning and in the kitchen in the afternoon.
The unit that I have built has 6 X 1,000 watt panels, 2 X 130 AH leisure Batteries
and a 3Kw/6Kw peak, pure sine wave inverter, it all works very well, so far.
I would like to double the output, to 6Kw or more, my initial idea was to buy a second
inverter of the same make and size as the one that I have and parallel them, but I was
advised against it, by the supplier as they would not be compatible!
Having read more on the subject I find that some inverters are incompatible, because
of the design, I cannot find out what that is.
The question is, have any of you here managed to overcome this seemingly crazy bit
of design and managed to parallel two such units?
I am thinking that equalising/balancing transformers, one for each, would fix this, any
ideas?
The inverter that I have has no earth!
Mike.
after much reading of "How To", I decided to build myself a system, bat as I don't
have a roof, I live in a ground flat, I decided to build a portable unit, I get the sun
in the living room in the morning and in the kitchen in the afternoon.
The unit that I have built has 6 X 1,000 watt panels, 2 X 130 AH leisure Batteries
and a 3Kw/6Kw peak, pure sine wave inverter, it all works very well, so far.
I would like to double the output, to 6Kw or more, my initial idea was to buy a second
inverter of the same make and size as the one that I have and parallel them, but I was
advised against it, by the supplier as they would not be compatible!
Having read more on the subject I find that some inverters are incompatible, because
of the design, I cannot find out what that is.
The question is, have any of you here managed to overcome this seemingly crazy bit
of design and managed to parallel two such units?
I am thinking that equalising/balancing transformers, one for each, would fix this, any
ideas?
The inverter that I have has no earth!
Mike.