Spot the mistake ++++ | Page 2 | on ElectriciansForums

Discuss Spot the mistake ++++ in the UK Electrical Forum area at ElectriciansForums.net

Doomed

-
Arms
Joined
May 26, 2009
Messages
1,132
Reaction score
764
Location
Dorset
[ElectriciansForums.net] Spot the mistake ++++
good neat job
 
Perhaps it is an intermediate switch that has been wired as if it were a double pole switch.
Nah.
You’ll not break the circuit using an INT switch.
It either is straight through or reversal of L1&L2.
 
Nah.
You’ll not break the circuit using an INT switch.
It either is straight through or reversal of L1&L2.
I think that's why Richard said it. We're looking for something that has been done incorrectly.
 
So what are you going to do next?
All existing wiring is surface clipped, so I had been asked to chase out and flush it in. The client has now accepted my recommendation to change the two way switching wiring and also re route (with new) wiring in loft so he board it.
Effectivaly a partial re-wire now.
 
All existing wiring is surface clipped, so I had been asked to chase out and flush it in. The client has now accepted my recommendation to change the two way switching wiring and also re route (with new) wiring in loft so he board it.
Effectively a partial re-wire now.

Your customer sounds a decent person ............ they have listened to your input and acted on it.

Nice one!
 
How were we meant to see that with the clues given?

Two twin and earths at an intermediate switch is not uncommon if it’s a central joint box install.
ikr feed at both 2way switches, switch wire at 1 switch, then a t+e between for strappers picking up intermediates

the feed at 1 end is obviously not used and terminated into a connector
 

Reply to Spot the mistake ++++ in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Your biggest mistake is admitting to a mistake.... If theres no witnesses, it didn't happen. However.... A few golden rules.... Never trust...
Replies
6
Views
109
What was the assossors name? Was it warren by any chance? Did you get it sorted in the end?
Replies
7
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top