Sunny Boy 1200 stuck in stop mode ..!

[Earthstore]

Hmmm, I think your installer needs to do some research.
Cable losses should be down to 1%, inverter needs to be set to country settings.

Sorry, but these systems are not just plug and play, they are/can be very complex,

 

[bob2041]

I know there is plug thing in the inverter like a dip switch to change the start up voltage .. i dont really want to open it to be honest .. i,ll wait till tomorrow and give germany a call.

 

[Earthstore]

I don't think Germany will come and re wire your sheds for you, they may tell your installer how to change the country settings though.

Best you turn it off and let the installer sort it, if you get it wrong, this stuff really bites.

We do not want to hear of a cutomer ending up in hospital or worse because they had been messing with a PV system.

 

[bob2041]

There are no customers .. just me its the 3rd pv system i made for a hobby.. different inverters different problems

 

[bob2041]

Im the installer .. its a hobby not a job.

 

[sedgy34]

You need competency to do this as your hobby, clearly you don't have as you now have problems

 

[bob2041]

You need competency to do this as your hobby, clearly you don't have as you now have problems

Turns out im too fussy...! Sunny boy is working normally... it seems it was too dark and there was not enough current to make electricity,.. sma is the incompetent one cos its says grid monitoring... when its doing notting. Doesnt tell u enough on the display and the german crowd didnt even know their own grid guard codes.