Tail light wiring help needed please - Panigale 1199 S

[scotta032013]

Hello all,

I have a tail light for a '12 Ducati Panigale 1199 S, that I can't get working properly. The brake light / daytime running lights work fine through the factory connector. The turn signals are the problem, they do not work independently - they flash like hazard lights.

The tail light only has the 'hot' wire for each blinker (no ground) and comes with a resistor to be installed as well. I've added a summary below of the wires shown in the attached picture. Any help would be greatly appreciated.

• Red arrows indicate the turn signal wires from the new tail light (hot only)
  [*]Green arrows indicate factory turn signal wires (hot / ground)
  [*]Black arrow indicates the resistor that should be wired in as well.
  

Thank you kindly

 

[Lou]

Hi

Did you fix your lights? Would love to see a photo of your bike!

 

[Dre1199s]

Hello all,

I have a tail light for a '12 Ducati Panigale 1199 S, that I can't get working properly. The brake light / daytime running lights work fine through the factory connector. The turn signals are the problem, they do not work independently - they flash like hazard lights.

The tail light only has the 'hot' wire for each blinker (no ground) and comes with a resistor to be installed as well. I've added a summary below of the wires shown in the attached picture. Any help would be greatly appreciated.

• Red arrows indicate the turn signal wires from the new tail light (hot only)
  [*]Green arrows indicate factory turn signal wires (hot / ground)
  [*]Black arrow indicates the resistor that should be wired in as well.

Thank you kindly

I have exact same issue with mine 1199 intergrated light. Have you found the solution?