Swa armour feeding TT system

[bencrockett15]

I have installed a TT system at my garage, and it is fed via 10mm 2 core armoured cable, does the armour of the cable have to be earthed via the supply tncs side or can it be glanded and earthed the garage side (TT).
Anyone know the regs ?
Thanks

 

[richy3333]

Well you should know the Regs if your doing the work and signing it off?!

 

[bencrockett15]

It's my own house , thanks for your detailed helpful reply

 

[richy3333]

So what, you should still know what you’re doing. Your house or the enchanted castle it’s irrelevant

 

[Octopus]

It's my own house , thanks for your detailed helpful reply

The fact its your own house is irrelevant IMHO ........ do you have a copy of the BYB or the BBB?

And also this falls under Part P, which is more onerous in Wales ........... suggest you read up on it.

 

[buzzlightyear]

have you got guidance note 8 bonding and earthing .
where's Pete with is guidance of garages and out side stables.

 

[Strima]

The armour should be earthed, doesn't matter which earthing arrangement. However I would earth to the system that would give the best disconnection time in case of fault.

 

[sam400]

If you gland it the garage end how will you provide the cable with earth fault protection?

 

[bencrockett15]

It will be protected by a 30ma rcd the supply end.

 

[buzzlightyear]

It will be protected by a 30ma rcd the supply end

?????

 

[buzzlightyear]

/post-6-134963568222.jpg

 

[MDJ]

Gasp!!!

 

[bencrockett15]

The supply end being a tncs system

 

[buzzlightyear]

The supply end being a tncs system

ampage

 

[buzzlightyear]