SWA banjo.

[Leesparkykent]

Just wondering what other sparks thoughts are on when making a SWA gland off. Do you generally fit the banjo inside the enclosure, outside the enclosure or piranha lock nuts every time on glands up to 25mm in size. Also there are no restrictions in/outside the enclosure to stop the banjo going inside or out (for arguments sake).

No real reason behind the poll just wanted to see what the general consensus is.

 

[Guest125]

I always do outside, gutter bolt and fly lead. Never used those piranha lock nuts.

 

[Darkwood]

Its circumstancial ... so option 4 that doesn't exist yet!

 

[Leesparkykent]

Its circumstancial ... so option 4 that doesn't exist yet!

Should of thought about it really.bored so thought I'll start a poll and now don't know how to change/add more options lol.

 

[Engineer54]

At the moment we use Piranha lock nuts on glands 20/25mm and Banjo's on gland sizes above. On our Main Switch Boards we don't use typical brass SWA glands we use top hat bolted glands, similar to that would typically be used for MV cable glanding... Hell of a lot easier to terminate say a 4 core 185mm or more SWA cable, especially in restricted spaces....

 

[Knobhead]

Should of thought about it really.bored so thought I'll start a poll and now don't know how to change/add more options lol.

You forgot the Electrical Trainee option, don’t bother terminating the SWA.

 

[ian.settle1]

You forgot the Electrical Trainee option, don’t bother terminating the SWA.

Or the sixth option I have seen Muppets use a jubilee clip around the armour with a length of earth cable coming off it.

 

[Anthony S]

When I used to work on switch gear, always cleaned the outer casing of the metal enclosure with a small wire brush (in a battery drill later in life) to make sure it was nice and clean for a good contact with the Bango.

 

[Simon-0116]

Outside generaly or inside if on waterproof stuff

 

[Fin170]

I tend to have them inside now due to the crap glands we are supplied corrode so quick

 

[Knobhead]

As DW said in #3 it’s circumstantial, you do what is required in the situation. You can vote all you like it’s immaterial.

 

[Sintra]

I always do outside, gutter bolt and fly lead. Never used those piranha lock nuts.

Prefer to use brass bolts & nuts myself.

 

[Guest125]

Prefer to use brass bolts & nuts myself.

I knew someone would pull me up on that. Just telling the truth.

 

[tomspark93]

I knew someone would pull me up on that. Just telling the truth.

excuse my ignorance but why?

 

[Jonspark]

excuse my ignorance but why?

you shouldn't be using guttering or roofing bolts, should be brass, certainly not allowed in hazardous areas.