Terminating a 400A 3 phase supply

[OnlQQker]

Got to say they made a nice job of this, especially the glanding process

 

[Moley]

Tony has his own Youtube channel. Jointech Cabling. Some of his work should be framed, it's that good.

 

[OnlQQker]

Tony has his own Youtube channel. Jointech Cabling. Some of his work should be framed, it's that good.

Thanks, I will go and look for him.

 

[pc1966]

Some neat work there and way above the sort of cable size I have done!

Now I want one of those fancy torque wrenches

One oddity though was no earth wire from the banjo to the main DB. I know the separate CPC would be the main route for fault current, but I personally would have linked the armour via the gland's banjo to the DB and not assume too much about the metal trunking when it comes to that size of cable.

 

[nicebutdim]

Tony has his own Youtube channel. Jointech Cabling. Some of his work should be framed, it's that good.

Best electrical channel on Youtube, where actual work is concerned.

 

[cliffed]

What size Swa … nice job guys

 

[nicebutdim]

What size Swa … nice job guys

Tony regularly works up to 4 core 240mm and 500mm singles. Well worth checking out his channel.

https://www.youtube.com/@jointechcabling9103

I'd watched the linked video from Residual Current a while back and thought it made him look like a new apprentice. Lot's of chat to camera and running about, but it was fairly apparent that the day's work was far beyond his experience.

 

[Lister1987]

3 things I got from his content;
1. I want an exhaust cutter, need to be damned
2. SWA armouring as free metal cable ties
3. "Jointech Cabling" because "Horse Cock Handler" doesn't make for a good business name

Ok ok 4; Beard envy is real