Testing and Inspection of Domestic Properties in Herts,Beds & Bucks

S

Sparky-Steve

HI All.

I am looking for a number of people who live in the Herts,Beds & Bucks areas who would like to work on their doorstep as so to speak, though please apply if you live outside the area. You will need to have your own tools and transportation.

I have a large number of domestic properties (Houses,Flats, Bungalows) that my client needs testing. We must leave each property with a satisfactory certificate where possible and where this is possible all code 1 and 2 must be done whilst in the property. We have been set a realistic budget for each property to achieve this.



So if you have a polite manner and get on well with people please email me direct with your cv and a bit about yourself. This is not a short term contract.

[email protected]

Hope to hear from a few of you soon
 
Last edited by a moderator:
Not sure how long it will take to test two 3 bed houses mate. I work in Industrial not the Domestic section. I'm sure someone will comment on this who is more in the know. Just seen some jobs that expect people to test about 5 houses a day.

5 houses a day - I know Im good but testing 5 houses a day - GOOD LUCK TO THAT MAN
 
When i was doing my Peridoics (2395) my tutor said he did his own house and took him all day, and thats i a house he knows.

you would have to just pick a few circuits and do 5 a day..

but Domestic house going back out for the Public, you would have to do the full test really.

In fairness that depends entirely on what is agreed with the client. Once upon a time I did work in social housing for a government organisation here which is responsible for all social housing (as this power was removed from the local councils in the early 1970s). From memory they allowed 2.5 hours per property for inspection and testing between tenancies.

So depending on what is required then two per day should be achievable (although depending also what remedial work is required).
 
i believe for houses, with new people letting the place you have to do a 100% checks on the place to make sure.

a few people Tash a place (even make it danger) when leaving a house (slams door and walks out)
 
With the greatest of respect I think it is good of you to come on here and offer work. But you can't blame the more experienced hands on here being skeptical

Your client is an electrician so he has tendered and won the contract. Knowing social housing contracts there isn't going to be a lot of fat on that price. It sounds as though your an agency of some kind so you going to have some of what is left of that fat.

That then leaves the guys doing the testing the scraps and it usually is scraps. I won't ask your prices Steve because that would be unethical but I'm guessing my 75 pound a test isn't far off the mark.

As your client negotiated what testing there is to done and what limitations there are set on it?
Is there a price or day rate for the remedials or are you expected to do them under the terms of the test?

As I said it was good that you came on and are offering work that is commendable.
 

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Back
Top