Triple switch issues | on ElectriciansForums

Discuss Triple switch issues in the UK Electrical Forum area at ElectriciansForums.net

Joined
Oct 15, 2021
Messages
2
Reaction score
0
Location
Texas
I replaced an old triple switch for a light/fan/heater combo in my bathroom with a Leviton triple rocker switch. There is one common connector on one side and 3 switched connections on the opposite side. The top switch works fine but the bottom two switches only seem to get power when the top switch is turned on. Does that make any sense? With the old switch the common for each switch was connected by a jumper on the back of the switch and each switch worked independently.
 
I think I accidentally wired the live to the switched side of the first switch. Old wiring and didn't have a tester so I was just trying to copy what was on the old switch. Will check for actual live today when I get my hands on a meter.
 
I think I accidentally wired the live to the switched side of the first switch. Old wiring and didn't have a tester so I was just trying to copy what was on the old switch. Will check for actual live today when I get my hands on a meter.
Should just need to take live from the first switch to the other two switches, sounds a fairly simple fix. Pics would be handy.
 

Reply to Triple switch issues in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Also posted in DIY. strange one in my kitchen. 3 sets of 2-way switched mains GU10 Philips down lighters. ( no dimmers) Have been fine for...
Replies
0
Views
173
The 2 inputs are separate and there should be no interlinking between SL1 and2 If there is there has to be a wiring error or a fault with the...
Replies
1
Views
394

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top