tyre pressures | on ElectriciansForums

Discuss tyre pressures in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

haj

-
Arms
Joined
Nov 6, 2008
Messages
256
Reaction score
45
Location
East Yorkshire
Anyone have a manual foraVauxhall combo 1.3cdti ? Would like to know what the tyres should be at checked some sites and they say 35psi but that seems a bit low to me.
Regards
Haj
 
there should be a sticker as you open one of the doors to tell you that. failing that, stick 32 in the front, and 35 at the rear. it'll be fine. trust me :shades_smile:
 
Anyone have a manual foraVauxhall combo 1.3cdti ? Would like to know what the tyres should be at checked some sites and they say 35psi but that seems a bit low to me.
Regards
Haj
if 35 psi seems a bit low to you, try 80 psi. I heard you get really good mpg with the only negatives being very little grip on corners (a small trade off). Let me know how you get on.

- - - Updated - - -

Anyone have a manual foraVauxhall combo 1.3cdti ? Would like to know what the tyres should be at checked some sites and they say 35psi but that seems a bit low to me.
Regards
Haj
if 35 psi seems a bit low to you, try 80 psi. I heard you get really good mpg with the only negatives being very little grip on corners (a small trade off). Let me know how you get on.
 
35 sounds about right for standard car tires.

My car a c1 is pumped to 34psi

Then again its only 800kg.

A transit has recomended psi of around 60

Don't go over the max embossed (raised) on the side wall of the tire
 
what's wrong with a swift kick? anyway, if you come over to scouseland, you won't worry about tyre pressures, you'll worry where the bloody wheels have gone.
 

Reply to tyre pressures in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
961
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

P
  • Article
water pressure problem, unvented system I'm trying to sort out a problem with low water pressure at my elderly parent's house where they have an...
Replies
0
Views
287
plomero
P
S
  • Article
Low pressure mixer spray tap recommendations ? I'll be installing a new kitchen, DIY, and the Mrs wants a mixer tap with a switchable...
Replies
0
Views
171
Splitty
S

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top