Very old cut out info

[kropaske]

Came across this recently. Looks like 30s, 40s maybe. Does anybody have any info, Bs number, kA values...

 

[Barry White]

No picture showing

 

[Jamchiv01]

I'm not sure but I would have the DNO out to look at it.

 

[westward10]

Nope I have seen some old stuff but not that. Is the neutral bar isolated from the enclosure.

 

[kropaske]

I'm not sure but I would have the DNO out to look at it.

i have
all he ask was "is anything wrong with it"
and than "we can change it for a fee if you want"

 

[Octopus]

Is that the main incoming supply or in a flat?

What is it protecting?

Come on matey give us ALL the story...

 

[Jamchiv01]

i have
all he ask was "is anything wrong with it"
and than "we can change it for a fee if you want"

Tell them the top is not IP4x and a small child could poke their finger or something metallic in the hole in the top. Also mention it's showing signs of corrosion.

 

[kropaske]

Nope I have seen some old stuff but not that. Is the neutral bar isolated from the enclosure.

Good point, i am not sure and dno guy put seal on the door now

 

[westward10]

Shame been there all them years not bothering anyone. Ask if you can keep it.

 

[kropaske]

Is that the main incoming supply or in a flat?

This is in 1st floor and supply 2 flats on the 2nd floor.
There is another one on the ground floor but bigger with 4 fuses supplying ground and first floor.

 

[GMES]

Doesn't look isolated does it westy well spotted.

 

[The Ghost]

Looks like asbestos on the lid and that separator bar and no doubt the fuse holders. And it has seen some blow outs maybe thermal damage to live tail. The line on the right looks (exposed) and 10 mm away from the holders attached to the casing. Yeh I would get the DNO to look at that the neutral is fixed to the casing and the live can be accessed through that hole at the top. I think you are right it is 1930 as originally it looks as if it was fused on the neutral. So would not take much to short live to neutral if you dropped a screwdriver down there. Its downright dangerous.

 

[Octopus]

This is in 1st floor and supply 2 flats on the 2nd floor.
There is another one on the ground floor but bigger with 4 fuses supplying ground and first floor.

So re supply to 2 flats, lets "assume" they are rewireable 3036 fuses, probably max 30A - so they are too small for the job (probably).

I think that this "fuse" is down to the flat owner - the bigger one downstairs is probably down to the supplier - where is the meter?

 

[Octopus]

Good point, i am not sure and dno guy put seal on the door now

REALLY??? Why did he do that?

 

[kropaske]

i Ze gave me open circuit but they said that this is not they problem. So i went

So re supply to 2 flats, lets "assume" they are rewireable 3036 fuses, probably max 30A - so they are too small for the job (probably).

I think that this "fuse" is down to the flat owner - the bigger one downstairs is probably down to the supplier - where is the meter?

We will see i've put 32amp supply for induction hob and 16amp for steam oven + kitchen ring and i will be rushing there on Christmas Day so she can finish with the turkey...

Meter inside the flat...