What Rates should I be getting as a subby | Page 3 | on ElectriciansForums

Discuss What Rates should I be getting as a subby in the UK Electrical Forum area at ElectriciansForums.net

J

John Matrix

Hello everyone I’ve recently become self Employed and it’s going ok. I’ve had a couple of weeks in a Job earning £21 an hour. I’m speaking to people on a regular basis and the question of what rate are you looking for always comes up. I’m just after some feedback on what rates to ask for. I have been getting £21 but I realise this is a top end rate in my area if the country. I don’t wana price my self out by asking for this much money all the time. So Is this too much? Is £21 about right? Or should I be asking for less to make sure I get the work.
Any feedback would be good. I obviously have a lot to learn.
 
Interesting question as rates of pay do seem to vary tremendously up and down the country. Here in North Kent you might expect to get between ÂŁ12 to ÂŁ15 pounds per hour...saw one in a recruitment company for ÂŁ16.50 for work at London outskirts yesterday so it depends where you are . I would advise never to get too high as customers will drop you like a hot cake...and you never get the work back. Hope this is of some use to yoy .
Those rates your talking about are shocking. Seriously hope your not going to work for those rates.
 
It is a difficult one as it is so variable as you have experienced in fact. On a short job say yesterday fault finding on a ring I charged ÂŁ35 per hour sorted it in three hours out the door with the cash. On jobs I do for a regular supplier of work ÂŁ200 per day. On commercial ÂŁ300 per day. When someone looks like they have a problem paying a tenner will do for an hours work. Just depends on the client, length of work, domestic or commercial, one off or regular, short term or long term, complexity and simplicity and so on. I feel my way with each client. Bottom line it is whatever the market will bear. ÂŁ21 per hour is not bad for northerly climes from what I hear. ÂŁ25 per hour would be better. I think it is all down to what will get you out of bed each day, if is not enough, let the next man take the work. From what I see there is loads of work out there/here.
 
It is a difficult one as it is so variable as you have experienced in fact. On a short job say yesterday fault finding on a ring I charged ÂŁ35 per hour sorted it in three hours out the door with the cash. On jobs I do for a regular supplier of work ÂŁ200 per day. On commercial ÂŁ300 per day. When someone looks like they have a problem paying a tenner will do for an hours work. Just depends on the client, length of work, domestic or commercial, one off or regular, short term or long term, complexity and simplicity and so on. I feel my way with each client. Bottom line it is whatever the market will bear. ÂŁ21 per hour is not bad for northerly climes from what I hear. ÂŁ25 per hour would be better. I think it is all down to what will get you out of bed each day, if is not enough, let the next man take the work. From what I see there is loads of work out there/here.
There are so many variables as @Vortigern has stated, Bristol like Bath has areas of great wealth where people wouldnt think twice of paying ÂŁ50 per hour and not even question it. Yet 100m down the road somebody would struggle to pay ÂŁ20 per hour for the same job. When sub contracting you are at the mercy of the people hiring, if self employed then you have much greater earning potential. like @Vortigern I can earn ÂŁ200 per day domestic no problems and often earn between ÂŁ250-300.00. without working my backside off. Commercial work has fallen off a cliff in Bath but Domestic is booming. there is no hard and fast rule but I call it postcode pricing!! charge what the market can take whilst ensuring it is enough for you to earn a good living you are comfortable with. the times you might do something a bit cheaper due to the customers circumstances is usually off set by the times the rich russian customers call and pay in ÂŁ50s and nothing but ÂŁ50s!! the bill is always rounded up to the next ÂŁ50 mark! I think of it as karma do a good deed then it all balances out in the end.
 
Those rates your talking about are shocking. Seriously hope your not going to work for those rates.
Those rates your talking about are shocking. Seriously hope your not going to work for those rates.
Yes I and many others work for those rates....it's what s on offer.As a matter of interest I've just finished adding up my invoices and outgoings for the the year and am willing to share the figures so as to help anyone thinking of starting out.
 
Now let me see, fifteen days of free time playing Golf vs fifteen days of driving up the motorway and working, does not seem the same to me.
But now you spend most of your time on here, chatting about electrics ;-)
 
Which begs a question , how ? Much should a Self deployed electricIan be charging for an hours / days work ..?

ÂŁ50 ph ÂŁ400 per day ?

2000ÂŁ per week ?
 
This is one of those "how long is a piece of string?" questions.

Basically... you can charge what you want... but;
If you quote too much, you might not get the job and die from starvation as you're not working.
If you quote too little, you might win every job you quote for and die young from exhaustion.

The trick is to find the middle ground... where you're getting a good level of work at a sensible rate. What this level is depends on a raft of things... geographic location, reputation, type of work, if it's specialist work, quality of work, speed of work, if you can work on a Sat, how clean you leave the job, charm etc etc... all sorts of things...
 

Reply to What Rates should I be getting as a subby in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

A day for sure. I recently installed an Anderson with dedicated CU. The run was a fair bit worse as I had to drop a section of ceiling and chop...
Replies
13
Views
708
  • Question
After fitting out the first room of downlights.... i expect him to get a bit speedier at fitting them There is so many unknowns to price at this...
2
Replies
25
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top