What Was Your Last Tool And What Is Your Next?!?! | Page 7 | on ElectriciansForums

Discuss What Was Your Last Tool And What Is Your Next?!?! in the Electrical Tools and Products area at ElectriciansForums.net

The one I had nicked was a Megger 100/4 analogue, lovely bit of kit. Hope whoever nicked it, gets electrocuted :mad:.
The new one will do the job though & it was cheap as chips so hey how.
 
Spent some big bucks the other week but SOOO worth it :)
Yep, ÂŁ6.71 of the apprentice budget went on
Large Multi Purpose Fold Step Stool Plastic Home Kitchen Foldable Easy Storage - http://www.ebay.co.uk/itm/Large-Multi-Purpose-Fold-Step-Stool-Plastic-Home-Kitchen-Foldable-Easy-Storage/291844039756?ssPageName=STRK%3AMEBIDX%3AIT&var=590848173276&_trksid=p2057872.m2749.l2648
I can reach the bathroom fan isolators etc, sit and each a lunch in comfort then flip it up-side-down to use as a clear-up bin (with a rubble bag) or tool tote.

Bet De Walt wish they'd thought of this first ;)
 
As an eBay Associate we earn from qualifying purchases.
Spent some big bucks the other week but SOOO worth it :)
Yep, ÂŁ6.71 of the apprentice budget went on
Large Multi Purpose Fold Step Stool Plastic Home Kitchen Foldable Easy Storage - http://www.ebay.co.uk/itm/Large-Multi-Purpose-Fold-Step-Stool-Plastic-Home-Kitchen-Foldable-Easy-Storage/291844039756?ssPageName=STRK%3AMEBIDX%3AIT&var=590848173276&_trksid=p2057872.m2749.l2648
I can reach the bathroom fan isolators etc, sit and each a lunch in comfort then flip it up-side-down to use as a clear-up bin (with a rubble bag) or tool tote.

Bet De Walt wish they'd thought of this first ;)
Awesome!!!
Thanks for that, I just bought one too :)
 
As an eBay Associate we earn from qualifying purchases.
Just taken delivery of the new Makita 10.8V SDS.
Makita HR166DSMJ 10.8v 2 x 4.0Ah CXT Brushless Rotary Hammer Kit - https://www.ffx.co.uk/tools/product/Makita-Hr166Dsmj-0088381838412-10.8V-2-X-4.0Ah-Cxt-Brushless-Rotary-Hammer-Kit

Despite already having a choice of SDS drills, I decided that I needed a little one for fixing holes in hard brick and concrete, especially when working up ladders, etc. It's also specced for holes up to 16mm. With a lower impact energy than the bigger ones, I'm hoping that it will also be easier to position accurately.

I've used this a bit now and can report that it's a good little tool. Easily does 16mm through brick and block if required. It doesn't look much smaller in the pics, but it's definitely easier to handle one handed.

[ElectriciansForums.net] What Was Your Last Tool And What Is Your Next?!?!
[ElectriciansForums.net] What Was Your Last Tool And What Is Your Next?!?!
 
I've used this a bit now and can report that it's a good little tool. Easily does 16mm through brick and block if required. It doesn't look much smaller in the pics, but it's definitely easier to handle one handed.

View attachment 37640 View attachment 37641

A plumber mate was looking at that sds and asked my thoughts on it. I told him it can't have much uummphh as a 10 volter. Obviously I am wrong on that score! Looks pretty nifty it does. Looks a good size for keeping in your tool tote.
 
I've used this a bit now and can report that it's a good little tool. Easily does 16mm through brick and block if required. It doesn't look much smaller in the pics, but it's definitely easier to handle one handed.

View attachment 37640 View attachment 37641

I'm interested in that hole cutting SDS bit. Where did you get it? Are they still available to purchase?
 
I'm interested in that hole cutting SDS bit. Where did you get it? Are they still available to purchase?
i bought one of those box cutters. OK on thermalite ( which you can cut with a bread knife anyway). but on brick they're about as much use as a chastity belt for katie price.
 
A plumber mate was looking at that sds and asked my thoughts on it. I told him it can't have much uummphh as a 10 volter. Obviously I am wrong on that score! Looks pretty nifty it does. Looks a good size for keeping in your tool tote.

I bought it for small fixings, but when I get the chance I'll try it with a 20 or 25mm bit and see how it does.
 
I'm interested in that hole cutting SDS bit. Where did you get it? Are they still available to purchase?

Bought a few years ago, along with a single box square one. Might have been from Toolstation. I've not noticed them recently. Really good for soft brick and block and OK for tidying up holes in harder bricks where the bulk has been removed by drilling or chiseling.
 
Out of curiosity, my Bosch 36V will drill a typical 5.5mm hole to around 50mm deep in 2-4 seconds. I am guessing the bigger Makitas are similar. How much slower is your new kit? It's gotta be slower, but I assume a good bit quicker than a decent combi.
 
Out of curiosity, my Bosch 36V will drill a typical 5.5mm hole to around 50mm deep in 2-4 seconds. I am guessing the bigger Makitas are similar. How much slower is your new kit? It's gotta be slower, but I assume a good bit quicker than a decent combi.
I've not used it enough to tell, but it didn't strike me as noticeably slower than my other SDS drills for small holes. It's certainly much faster than an ordinary combi drill on brickwork. I think you'd have to be doing an awful lot of holes to care if it was slightly slower.
 

Reply to What Was Your Last Tool And What Is Your Next?!?! in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
395
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
980
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Sticky
  • Article
Some links. We earn a tiny 'advertisers fee' when you purchase things through links from our forum here. But the links only last 24hrs. So before...
Replies
0
Views
1K
how often will you need to use it? Would renting one from a tool hire place be more cost effictive... and might give you an idea of good brands...
Replies
1
Views
531

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top