Where can I get these?

[Leader]

I need to purchase the below but I'm having trouble finding the right cable in the right size. Any ideas?

1.5mm 3 core H05VV-FG
2.5mm 3 core H05V2V2-F

I only need a couple of meters of each.

Cheers

 

[Richard Burns]

Screwfix perhaps?
http://www.screwfix.com/p/time-roun...te/83440#product_additional_details_container
http://www.screwfix.com/p/time-heat-resistant-flexible-cable-3093y-3-core-2-5mm-x-5m-white/80786

 

[Besoeker]

Try CSE
01628 850024
It may help if you mention that a guy from Cortina suggested it.

 

[Leader]

Thanks both. I don't think the cables from screwfix meet the spec. I'll give CSE a buzz.

 

[Andy78]

After a quick search HO5VV-F would suffice as I think the G stands for an integral protective conductor, which it would have if purchased with the correct number of cores.
Seems that HO5V2V2-F is standard PVC HR flex to 85C, so any equivalent cable should suffice.

http://www.internationalconfig.com/documents/2004catalog/m.pdf
http://www.batt.co.uk/upload/files/309y_1231502205.pdf

 

[Octopus]

what are they for?

 

[Leader]

Murdoch, the oven and hob. This is what the technical specs calls for.

 

[Leader]

Thanks Andy

 

[Richard Burns]

After a quick search HO5VV-F would suffice as I think the G stands for an integral protective conductor, which it would have if purchased with the correct number of cores.
Seems that HO5V2V2-F is standard PVC HR flex to 85C, so any equivalent cable should suffice.

http://www.internationalconfig.com/documents/2004catalog/m.pdf
http://www.batt.co.uk/upload/files/309y_1231502205.pdf

Thank you for the confirmation, I was worried I was wrong for a moment!

 

[Leader]

I had looked at those on screwfix but the comments said they weren't suitable for ovens...

 

[Andy78]

Thank you for the confirmation, I was worried I was wrong for a moment!

Ha ha, pull the other one.

 

[Octopus]

Just use twin and earth on a plug like Kev the kitchen fitter!

TLC sell suitable stuff by the meter

 

[Richard Burns]

I had looked at those on screwfix but the comments said they weren't suitable for ovens...

I would probably not use the lower temperature one for an oven or hob, but the 90°C rated cable is what the manufacturers tend to fit when they fit a cable to an appliance and is probably the best you can get without going onto silicone or MICC cables.

If the manufacturers instructions specify those cables then one assumes they might know what they are talking about and have specified correctly. (perhaps)
They normally go on about H07RNF but that is only rated to 85°C.
The cables you list are very basic flexes: PVC/PVC 300/500V flexible cable, and heat resistant PVC/heat resistant PVC 300/500V flexible cable; the V2 is for heat resistant PVC.

 

[Leader]

Thanks Richard