Where to connect power cord to induction single phase motor 240v | on ElectriciansForums

Discuss Where to connect power cord to induction single phase motor 240v in the Australia area at ElectriciansForums.net

Joe9009

DIY
Joined
Apr 3, 2020
Messages
12
Reaction score
3
Location
Perth
[ElectriciansForums.net] Where to connect power cord to induction single phase motor 240v


[ElectriciansForums.net] Where to connect power cord to induction single phase motor 240v


(I would want it to run clockwise)

Any guidance would be much appreciated.
 
It is a motor which can be powered from 110 or 220v depending on how the terminal links are connected. What voltage are you applying, 240v?


i guess it must be 240v from the power of my house?
[automerge]1585924691[/automerge]
i guess it must be 240v from the power of my house?
Online it says standard voltage in oz is 230 but 220v machine can be used?
 
Last edited:
Yeah it should be okay on 230v but it will spin slightly faster. You need to remove the links and reconnect as per the third diagram on the top. Post a pic when done and I will tell you where to connect the 230v.
U3, Z2 and U2 linked. Then U1 and Z1 linked.
 
Last edited:
Yeah is should be okay on 230v but it will spin slightly faster. You need to remove the links and reconnect as per the third diagram on the top. Post a pic when done and I will tell you where to connect the 230v.
U3, Z2 and U2 linked. Then U1 and Z1 linked.
OK, that must be the third diagram under the circle (or CW) with the plus inside it.
[automerge]1585928807[/automerge]
OK, that must be the third diagram under the circle (or CW) with the plus inside it.


[ElectriciansForums.net] Where to connect power cord to induction single phase motor 240v
 
Last edited:
The mains goes to U4 and either U1 or Z1 doesn't matter which way around. Is there an earth terminal.
Does Z2 still have its yellow wire connected with the red.
 
The mains goes to U4 and either U1 or Z1 doesn't matter which way around. Is there an earth terminal.
Does Z2 still have its yellow wire connected with the red.
on Z2 there is a yellow and red wire mated.
[automerge]1585931786[/automerge]
on Z2 there is a yellow and red wire mated.
I don't see a separate earth terminal, and wondered about that.
 
Last edited:

Reply to Where to connect power cord to induction single phase motor 240v in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
223
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
683
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
625

Similar threads

Hi, Thanks for that, you learn something new almost every day! Regards Griffey
Replies
5
Views
1K
Hi James, At the inverter end the multi strand is ferruled and torqued in the terminal and at the motor end they are the “wago type” push fitting...
Replies
2
Views
366

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top