Why are new build prices so bad? | Page 2 | on ElectriciansForums

Discuss Why are new build prices so bad? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Dec 13, 2020
Messages
10
Reaction score
3
Location
Colchester
Hi , I've recently started on a new build site in essex, self employed sub contracting for a colchester company for which I have done work for 3 years .recently I've started to take the prices as a personal insult. A 3 bed house 1st fix including 2x data, 2x tv points 3x bt around 16 x sockets , 2 zone combi heating with weather compensater, oven and separate hob,3x smokes 1x heat , 1x co detectors, 4x fans, shaver socket, 10xlights and switches and 2x outside lights and garage supply is ÂŁ250 which is around ÂŁ600 pound less than the plumbers 1st fix price! How can anyone do a good job for that? And apart from walk off site ( which I have done) what can be done? And why are electricians the worse paid trade on new build sites?oh and the 2nd fix price was ÂŁ10 less
 
Scroll to 1.50 in this video and watch how the kitchen plug sockets are installed in these London new build apartments


that’s how you wire a new flat for 250 , just rushed and sloppy
 
I'd have to use a lot of restraint to beat the urge to kick them in the b0ll0cks. What is this obsession with impact drivers ? Hate the things.
speed / looks cool ( dint worry if you mangle all the terminals)
 
Yes you're spot on but when a tiler pulls up holding a ÂŁ20 trowel telling you he earns 250 -300 a day you wonder what it's all about

Has anybody actually seen the wageslip or yearly accounts of these so called high earners.
It's easy to talk B*llocks.

He may earn 250 - 300 a day but is that every day or occasionally, how many hours a day do they work and what do they earn on the rest of the days / months / years.
 
What do site tilers get these days , used to be ÂŁ25-35 pm Labour only , most could easily do a sq mtr per hour

I think we paid our tiler ÂŁ60-65 pm to do our bathroom but he provided all the adhesive/ grout/ trim etc in that , we just supplied the tiles

pretty decent money if you are fast
 
Even light switches and fittings ?? It's quite depressing the way this trade is heading isn't it ?
It is in this particular part of it . I came into new builds after 15 years employed by a small company where it was customer based ,all about quality of work but unfortunately not great pay. So a friend who had been doing new builds for some time got me into price work on new builds .I was instantly shocked by the quality of work and was constantly told that i had to drop my standards to be able to make money. Something I'm not happy doing however I did ok ,but it seems recently there is a lot more involved but prices have been cut to a level where to do the job in the time the price allows is frankly dangerous
 
The trouble Is the developers will always find somebody to throw the cables in for ÂŁ10 a hour , there is no shortage of cheap Labour out there.
It’s been this way since I started out.
It’s not a bad starting point for a young sparks to cut their teeth lashing in new builds for a 100 quid a day.
Most decent sparks after a year or so will move into private jobs and small building works where the rates are much much better
Yep I remember the boss saying to a first year apprentice, just copy the first fix of the other house. lol

There's your cheap labour Been going on for years.
 
Checked out some new builds a few years back, TV points in every room. That wasn't a lie, but there was no coax connected to them...
Correction...there was a short length attached but only about a foot long, disappearing into the cavity. The loft aerials were there with a length of coax attached to them, but the end of the cable was just buried under the insulation. You can do a 3 bed an hour that way, then off you go in your van with cash in your pocket, and swap your PAYG SIM-card and no-one can get in contact with you. Inspection? None...
 

Reply to Why are new build prices so bad? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
348
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
888
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Thanks all for your comments, advice and suggestions. The following is probably pretty boring for most, and is simply a summary of how the job...
Replies
8
Views
869

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top