wood bits ???

[jenions]

irwin 6x bits, drill straight through them unwanted nails

 

[Amp David]

I like the Bosch ones. Have a screw on the end which makes them go through easier. About 3 quid each.

 

[JD6400]

Bosch for me too !

 

[mainebankelec]

i use ck fast 4 bits clear the hole quicker and suprisingly cheap

 

[rocker]

I like the Bosch ones. Have a screw on the end which makes them go through easier. About 3 quid each.

I reckon the Bosch ones are good. They have a screw on the end and they go in easier. Three quid a pop and all.

 

[davelerave]

Armeg stubbie wood beavers eh

must take a look

 

[Spudnik]

Cheapy flat bits for me.

Buy in bulk from the wholesalers

 

[RWJ]

Armeg Wood Beaver Drilling Set - 3 Piece "stubby" (16, 20, 25mm) , ARMWWB3PCSET at D&M Tools

Though I only paid £18 from my local wholesalers

 

[MBunce]

Try Tatanium coated Steel Drills - great in wood and fine if you hit a nail

 

[vitoboy]

ive used lots (and lots)of fast 4 and irwin bits and some cheap copys.
you can re touch them with a file when worn..but nails are a problem.
i love em an 18v battery drill will do a 25 mm hole in a joist as a rule but a 240v angle drill and you can drill through anything made of wood no worrys.
this said id like to see what angles these bits should be sharpened to...i just guess a bit...works for a while.
i hate to throw a new bit just coz of cliping a nail when 98% of it is good.
better still are joists with knockouts or steel rail between....super joists ..love it..
ta
vito