Would this cause me to fail my Am2?

[Derry94]

hi everyone ,

I’ve just completed my am2 I think I did fairly well on everything the only thing that’s bugging me is, on my shedual of test results I’m sure I put the wrong size cpc for the c/o detector circuit.

I put the cpc as 1mm however I think it was 1.5 would this one thing cause me to fail?

 

[Simonslimline]

Okay so it’s a points based system ? I was worrying because I thought one thing wrong = fail, I took it at Harris house in Harlow

You should be fine. Worst case is you have to retake just that section.
Enjoy the sun and check your emails tomorrow. Keep us posted.

 

[Simonslimline]

Okay so it’s a points based system ? I was worrying because I thought one thing wrong = fail, I took it at Harris house in Harlow

You should be fine. Worst case is you have to retake just that section.
Enjoy the sun and check your emails tomorrow. Keep us posted.

 

[Gareth Brookes]

1.5mm2 fp200 has 1.5mm2 cpc
2.5mm2 fp200 has 2.5mm2 cpc

 

[Gareth Brookes]

1.5mm2 fp200 has 1.5mm2 cpc
2.5mm2 fp200 has 2.5mm2 cpc

 

[Derry94]

Just received my results by email and I passed! I can stop stressing now thank god

 

[Dave OCD]

Well done mate.

 

[Loki]

Congrats on passing your AM2

 

[Risteard]

FP200 has a full-sized cpc not a reduced csa one. That said it's a minor paperwork issue. You might lose a mark if they look closely at it but certainly they're not going to fail you simply for that very minor error.

 

[MJPD29]

Congratulations welcome to our world

 

[telectrix]

Congratulations welcome to our world

 

[Derry94]

Cheers lads