D
davesparks
But only for testing which is to be used for completion of a report or certificate.
- Thread starter tomlonsborough
- Start date
- Replies 15
- Views 2K
Discuss Zs and IR pitfalls in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Reply to Zs and IR pitfalls in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar threads
- Question
There can be a few reasons for low L+N -> E readings:
Connected equipment is leaking. By design, or just old/damp
SPD are connected (but there...
- An Buachaillín Bán
- UK Electrical Forum
- 9
- 1K
Interesting question & always gonna get different views on this.
EICR testing seems to have changed over the years & not by us the Electricians...
- LLPowerRanger
- Periodic Inspection Reporting & Certification
- 7
- 1K
Recommended Sponsor News
- Article
thanks for the clarification. ( also thanks to Dan. ).
- Uheat – Jake
- Forum Sponsor News and Offers
- 6
- 2K
- Article
Thanks Ivan that's very kind of you. :)
- Article
More info on link below
http://sbsc.uk.net/
- Article
Happy Friday Everyone!
Subscribe for more jokes direct to your mailbox or send us your own jokes to be in with a chance of featuring, by clicking...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Song words.Take 3 massive dance tunes from the late 90's/ early 00's.. mix them up a bit with a wee...- Latest: littlespark
-
Disabling a setting on a Belling cooker hood.There was a thread a while ago about replacing a cooker hood motor, which might be of interest...- Latest: Avo Mk8
-
Outlet Power MysteryAs above from James. Possible poor connection, eg loose terminal screw(s), in the troublesome...
- Latest: Avo Mk8
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.