First large domestic rewire for me
![[ElectriciansForums.net] Not sure what to think](https://www.electriciansforums.net/attachments/20181003_113256-jpg.44609/ "[ElectriciansForums.net] Not sure what to think")
on my own, all going well and completed my dead testing on completed circuits a week ago. Tackers arriving tomorrow so thought I'd test again today and came accross this - see picture ! can't help thinking it's malicious
Discuss Not sure what to think in the UK Electrical Forum area at ElectriciansForums.net
It wasn't a half arsed attempt at holding the glass wool or plastic in place was it?
For what reason did you decide to do the dead testing for a second time? Did you have a sense something could have been damaged?
and metal supports as well.
no reason whatsoever except malicious. pi$$ in his cement mix.
Have you brought this to the clients attention? Without your spidey sense, you might have energised the installation, everything running smooth until 5pm, after you’ve gone home and the clients house is smouldering away happily.
Is that particular circuit rcd protected?
Has it caused an N-E short or L-E? The former wouldn’t trip an MCB like the latter would.
Is that particular circuit rcd protected?
Has it caused an N-E short or L-E? The former wouldn’t trip an MCB like the latter would.
Reply to Not sure what to think in the UK Electrical Forum area at ElectriciansForums.net
Similar threads
- Question
https://professional-electrician.com/technical/replacing-a-consumer-unit-in-a-dwelling-niceic/
All circuits should be tested
- lozarus
- UK Electrical Forum
- 3
- 1K
Thanks mate for the advice, this is just what I was looking for. I think I’ll have to put some thought into the domestic route due to the NVQ and...
Recommended Sponsor News
Quickwire Now Sponsor ElectriciansForums.net
I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!
![[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net](https://www.electriciansforums.net/attachments/970x90_content_banner_cqw-jpg.110414/ "[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net")
@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"
@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"
PCBWay Now Sponsor ElectriciansForums.net!!
I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.
Welcome to the community and thanks for your sponsorship!
![[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!](https://www.electriciansforums.net/attachments/970x90pcb1-jpg.110635/ "[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!")
PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.
![[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!](https://www.electriciansforums.net/attachments/970x90-3pcb-jpg.110636/ "[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!")
Welcome to the community and thanks for your sponsorship!
PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
UK Safe Summerhouse SupplyI went with a 4 way cu on my own. Used one for lights, 1 for ring, and the 3rd for an electric...- Latest: KungFuTurkeyLeg
-
Electric CookerGood Morning all Looking for some advice. Recently had an electric cooker installed from a...
- Latest: Mg12345
-
What is the Pinout of Deutsch 8 Pin Connector ? Are some of the pins joined on the connector? Or are all the pins separate from one another?Surely the pins are separate. I'm just guessing and am not an electrician it has to be said.- Latest: Dan
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.