Advice on Voltage Testers please. | on ElectriciansForums

Discuss Advice on Voltage Testers please. in the Electrical Tools and Products area at ElectriciansForums.net

RDB85

-
Trainee
Joined
Nov 23, 2017
Messages
1,084
Reaction score
168
Location
Liverpool
I am building up my tool collection, slowly, we have done safe isolation, on our course, so I was looking to buy a Voltage Tester. But I know the Fluke ones have had a recall. But I have seen these two:

Fluke T150 Voltage and Continuity Tester - Edwardes - https://www.edwardes.co.uk/en/products/fluke-t150-voltage-continuity-tester

Megger Electricians Two Pole Voltage Tester - https://www.its.co.uk/pd/TPT320-Megger-Electricians-Two-Pole-Voltage-Tester-_MEGTPT320.htm

They both look very similar but which would you go for? I will also need a proving unit which is here:

Megger Electricians Proving Unit - https://www.its.co.uk/pd/MPU690-Megger-Electricians-Proving-Unit-_MEGMPU690.htm
 
[ElectriciansForums.net] Advice on Voltage Testers please.
i have this .good v/tester .
 
I had the di-log ^^^ one. The lead came free from the main body after a year.

Wouldn't worry about the Fluke recall; least they've identified the fault and gone about the recall. I just received my replacement.
 
I have a Fluke T150 (currently at Fluke for the recall) and a T90. They are both great units, but I love the T150. It has been abused and lasted well but did finally succumb to the fault that triggered the recall.

I have a Socket and See proving unit, I found it was cheaper than the likes of Megger etc. but works great.
 
On the US currency is written "In God We Trust" and let me just say, this is the one tool that we must trust to always be right.

I have a Kewtech tester and prover - it's been perfect for 3 years, but that Megger does looook verrry nice (can you tell I want one?).
 
I personally hate fluke but that is me, I would go with the Meggar myself, JMO.
 
I've got a fluke 117 great bit of kit if you have somewhere to put it ie a bench the amount of times I've had to let it dangle. I'd go for a pen style as they are very easy to read from if you have no croc clips. (Stop stealing by croc clips!!!)
 
I was going to look at a Multimeter but I don’t have the cash for one right now. I thought a voltage indicator would be a great start.
 
I’ve decided to go for the Megger. It looks a nice piece of kit. I’m sure it will last many years.

On the subject of Multimeter, are they worth getting or would it be better saving for a MFT?
 
I’ve decided to go for the Megger. It looks a nice piece of kit. I’m sure it will last many years.

On the subject of Multimeter, are they worth getting or would it be better saving for a MFT?

If you need to test small voltages accurately, or if you need to measure DC voltage, capacitance, etc. then you'll need a multimeter. They can also be useful for recording min/max readings on AC circuits over a period of time. But if you'll mostly be house bashing, it's a nice to have, not an essential.

Remember what you've been taught on safe isolation too, I.e. you must use a two pole tester, not a multimeter or MFT (or neon screwdriver or voltage pen).

You'll need an MFT, as these do tests that you can't do with a multimeter, such as IR, PFC, RCD tests.

Finally, if you do get a multimeter, think very carefully about what live tests you do with it, as its not designed to do what an MFT does, and apart from a fuse, offers no protection against doing the "wrong" live test. Check out some of the exploding multimeter videos online, they focus the mind somewhat.
 
I'm in market for 2 pole voltage tester and most budget friendly option that fullfils my conditions (smaller is better, voltage reading, continuity test) is Voltcraft VC 55.(Other option is Uni-T UT 18 D, but I don't know if it is any good.)
[ElectriciansForums.net] Advice on Voltage Testers please.

It is probably same as Megger TPT320 and Metrel MD1160, just in different colour, so I would appreciate if anyone has feedback regarding Megger or Metrel. Thank you!
 
I’ve decided to go for the Megger. It looks a nice piece of kit. I’m sure it will last many years.

On the subject of Multimeter, are they worth getting or would it be better saving for a MFT?
I have the one in the link.
It does not display a readout for resistance , only buzzes.
It is very sensitive on resistance and if you have the probe ( all safety checks assumed done) covers removed and touch the tips, if your fingers are the least bit moist it will buzz and may give a false continuity reading.
Other than those observations it is a lovely tester.
 
or one of these like wot i have.

[ElectriciansForums.net] Advice on Voltage Testers please.


i also got this.:
[ElectriciansForums.net] Advice on Voltage Testers please.
and should either of these fail, there's always a wet finger.
 
[ElectriciansForums.net] Advice on Voltage Testers please.


I have this one it comes in its own case and the proving unit is easily used through the test probe holes in the bag.
[ElectriciansForums.net] Advice on Voltage Testers please.


I have this one it comes in its own case and the proving unit is easily used through the test probe holes in the bag.
Agree best one I ever had no gimmicks, does what it says on the box good bit of kit. expensive but worth it, in my opinion.
 
Never used a proving unit ever until recently

I tend to carry a Martindale AVI (after my Steinel broke) also have a clamp meter , multimeter and a Drummond all in the same bag, but only use the AVI's for checking voltage is present etc

One thing that annoys me is most makes the probes are quite chunky and some isolators don't have holes big enough to make contact

Previously always used known supply, seemed like a large outlay for something rarely needed for the type of work I used to do as there was always a socket or something that could be utilised

However moved into more industrial work a few years ago and had several occasions recently on sites where using a known supply wasn't allowed as it usually meant opening a panel etc and a proving unit was needed ,

Daft rules I had to prove dead then lock off etc only to be turning panel back on after dead testing to faultfind components which was allowed !

Spent 30 mins looking around at various sites and saw a used RS branded proving unit on eBay

I bid a fiver and won it, so with postage came to just under 8 quid , new battery fitted worked fine and probably the best bargain I've ever had tool wise!
 
I've had my fluke T5 for around 7 years at a guess. Works a treat still. Continuity readings start off a little high when the batts are low, but then I don't use it to get accurate readings as such. The croc clips are a good addition to have.
My only gripes would be that you can't zero the leads, and the annoying curved back which stops it from sitting still when using both probes.
 

Reply to Advice on Voltage Testers please. in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Mine (Martindale PD90) gets used fairly rarely. You only need one if there isn't a source of power to check the tester still works after...
Replies
2
Views
639
I have the Kewtech that I bought in an emergency when my trusty Fluke that lasted many years gave up. It works! It has single pole testing too btw...
Replies
3
Views
1K
Might be time they also removed this from their downloadable manual.
Replies
8
Views
3K
nicebutdim
N
It is unfortunately impossible for someone such as myself to access the actual standards documents BUT I did find this reference about Australian...
Replies
11
Views
3K
  • Question
Despite my sarcastic post, I've only ever considered using a voltage tester with a proving unit rather than an MFT
Replies
19
Views
3K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Trending Electricians Tools

New job, new tester; Megger 1741+, those that have one; anything good/bad to report? Work also trusting me with a Flir E5 magical heat-reading...
Replies
210
Views
96K
Absolutely correct they hold water, shrouds are totally unnecessary. 20s is 24mm spanner, 20 large is 30mm spanner.
2
Replies
41
Views
45K
If that little thing, plugs your butt, you better eat slowly. 🤣
    • Like
2 3 4 5 6 7 8 9 10 11 12 13 14
Replies
336
Views
41K
B
I'd say everyone has knowledge gaps in their area of electrical work I know i have quite a few i work on to fill them in
2 3 4
Replies
75
Views
29K
I too have been tempted.. I’m buying for my son. He’s in his2nd year at collage and looking for apprentiship. Sadly it’s almost impossible in my...
Replies
11
Views
25K
Of course. “Ye canna change the laws of physics” EDIT. oh blimey, I just spotted the date of the OP. ? Thank you very much @Lord lee jan You...
Replies
40
Views
23K
Only way to do it in a tight space
2
Replies
33
Views
21K
The display on the Mft pro is not very durable mine is broken already 😡
2
Replies
29
Views
21K
Only lawyers , solicitors and dodgy chat up lines charge for picking up the telephone 🙃
2 3 4
Replies
97
Views
20K
J
I'm not entirely certain as it's very tough, but brittle when cold.
2 3
Replies
65
Views
19K
nicebutdim
N

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks