Di-log 9118 not operating correctly | on ElectriciansForums
Click here to remove these ads

Di-log 9118 not operating correctly

Post new thread

Discuss Di-log 9118 not operating correctly in the Electrical Tools and Products area at ElectriciansForums.net

L

Lc1

-
Joined
Apr 25, 2015
Messages
115
Reaction score
22
Location
Anywhere
Hi,
I have a di- log9118 and it wont a continuity reading on the earth pin. I can get continuity from the other 2 pins. I have taken it apart and all the internals seem to be fine, are firmware issues common on this model ?

Cheers.
 
Hi,
Thanks for the reply. Was an earth continuity test, The reading was >200. I just done a test with the cables/croc clips connected to the pins on the meter and there is no continuity between L and E and also between N and E but I can get a result between L and n.

Thanks
 
Have you read the instructions for your meter? Is your tester definitely set to continuity? Only 2 leads are used whilst doing a continuity test. It looks like live and neutral are the 2 used in your situation. The colours of these leads is totally irrelevant during this test and different tester use different leads.
 
As @MJPD29 said, you don't use the middle pin.

[ElectriciansForums.net] Di-log 9118 not operating correctly

 

Reply to Di-log 9118 not operating correctly in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

G
TIS700 PAT Tester - 3 phase testing issue
Hi all, We have a limited in house PAT testing requirement and were advised that the TIS700 fitted our needs. The unit works fine for 110V and...
Replies
0
Views
998
GSGFaw
G
S
  • Question
Outdoor electrical socket
Or just save all the agro and get a proper sparks round for 45 minutes to test the supply cable and re-fit the socket 'properly'
Replies
19
Views
1K
Dustydazzler
D
D
Tesla wall connector gen 3
Hi I have a job coming up with a Tesla Ev point. From what I read you need a Matt e box which is fine. It looks to me like it has no load...
Replies
0
Views
313
Dave123
D
D
  • Question
PA Question
Thank you so much I have spent hours and hours looking for this answer, appreciate your time and comprehensive reply. I will look further into the...
Replies
2
Views
369
Dax196
D
U
Mains power to electric shower only 0.6v???
Question 1 do you prefer buttered, salted or sweet salted? I'm guessing salty 😜 1. Auto range multimeter (used on mains before when testing the...
Replies
2
Views
482
unhandymann
U

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Trending Electricians Tools

Dan
Multifunctional Testers - Which one have you got and how long has it lasted?
New job, new tester; Megger 1741+, those that have one; anything good/bad to report? Work also trusting me with a Flir E5 magical heat-reading...
    • Like
2 3 4 5 6 7 8 9
Replies
210
Views
96K
Lister1987
Lister1987
A
Spanners for swa glands
Absolutely correct they hold water, shrouds are totally unnecessary. 20s is 24mm spanner, 20 large is 30mm spanner.
2
Replies
41
Views
45K
Thedeep
T
M
what are some tools that were worth the price tag?
If that little thing, plugs your butt, you better eat slowly. 🤣
    • Like
2 3 4 5 6 7 8 9 10 11 12 13 14
Replies
336
Views
41K
Zimmerin
Z
B
Best screwdriver for roofing bolts?
I'd say everyone has knowledge gaps in their area of electrical work I know i have quite a few i work on to fill them in
2 3 4
Replies
75
Views
29K
Mikegh
M
T
cheaper alternative to veto pro pac xxl
I too have been tempted.. I’m buying for my son. He’s in his2nd year at collage and looking for apprentiship. Sadly it’s almost impossible in my...
Replies
11
Views
25K
Jaybird
J
K
Multimeter showing reading when nothing is plugged in
Of course. “Ye canna change the laws of physics” EDIT. oh blimey, I just spotted the date of the OP. ? Thank you very much @Lord lee jan You...
2
Replies
40
Views
23K
Taylortwocities
T
A
Best gland pliers
Only way to do it in a tight space
2
Replies
33
Views
21K
MJPD29
MJPD29
wildwest
opinions sought on the TIS MFT PRO
The display on the Mft pro is not very durable mine is broken already 😡
2
Replies
29
Views
21K
Chrissssss
Chrissssss
R
Veto Pro Pac - Worth the Money?
Only lawyers , solicitors and dodgy chat up lines charge for picking up the telephone 🙃
2 3 4
Replies
97
Views
20K
Dustydazzler
D
J
Tool for cutter the steel wire of SWA cable
I'm not entirely certain as it's very tough, but brittle when cold.
2 3
Replies
65
Views
19K
nicebutdim
N

YOUR Unread Posts

Tilers Community
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
NHS Forums | Forum for NHS Staff and NHS Patients
Back
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks