Discuss Opinions please..... in the UK Electrical Forum area at ElectriciansForums.net
![[ElectriciansForums.net] Opinions please.....](https://electricians.s3.eu-west-1.amazonaws.com/data/attachments/10/10113-fd13d26d09e63a65de92aff34eb75304.jpg)
Could get a bit of high resistance on that L1 terminal.
If you find the clamp bolt is seized or stripped then it's deffo a replacement, also if it's a cheap and readily available contactor you could replace entirely if you're not comfortable with repair. You could possibly strip the termination, file any corrosion or heat damaged areas back to shiny metal, cut back the wire and re-terminate. I've repaired worse especially when in a bind, just check the terminal resistance and volt-drop under load after the repair.
Yes. No.
C1 on a condition report that...terminations or connections have no or damaged barriers and enclosures.
C2 for the cable thats damaged, but you've told me to forget about that one so...
C1 on a condition report that...terminations or connections have no or damaged barriers and enclosures.
C2 for the cable thats damaged, but you've told me to forget about that one so...
G
Guest55
thank god someone gave the right answer !
nothing that a wire brush and WD40 cant fix eh glenn ?
as for the suggestion of a code 1 for surface corrosion ?
G
GLENNSPARK
lol...thank god someone gave the right answer !
nothing that a wire brush and WD40 cant fix eh glenn ?
as for the suggestion of a code 1 for surface corrosion ?
Woah, before you're wanting to start ww3 biff hang on
I do agree completley with what's said above, just clean it up and crack on - do it all the time.
I just went by what that stupid niceic best practice guide says ( had it handy ) It says in their, like i said - terminations or connections have no or damaged barriers and enclosures.
I do agree completley with what's said above, just clean it up and crack on - do it all the time.
I just went by what that stupid niceic best practice guide says ( had it handy ) It says in their, like i said - terminations or connections have no or damaged barriers and enclosures.
- That's what i'd interpet the OP's picutre as, connections damaged...even surface. Always have interpeted as that...shoot me down in flames then biff, i know you're dieing too lol
lol
G
GLENNSPARK
but its retreavable...so why bloody code it?...lol...Woah, before you're wanting to start ww3 biff hang on
I do agree completley with what's said above, just clean it up and crack on - do it all the time.
I just went by what that stupid niceic best practice guide says ( had it handy ) It says in their, like i said - terminations or connections have no or damaged barriers and enclosures.- That's what i'd interpet the OP's picutre as, connections damaged...even surface. Always have interpeted as that...shoot me down in flames then biff, i know you're dieing too
wire brush and old screwdriver time here..
crack on...
biff...mr.answer to everything. glenn...electricians forum's most aggressive.
I don't think this is a fair 2 on 1 lads lol.
I agree, i wouldn't code it - i'd repair...obviouslly make the wire off again, but the terminal wants cleaning up. I was just stating what the practice guide IMO said.
...do i get let off now?
I don't think this is a fair 2 on 1 lads lol.
I agree, i wouldn't code it - i'd repair...obviouslly make the wire off again, but the terminal wants cleaning up. I was just stating what the practice guide IMO said.
...do i get let off now?
S
Silly Sausage
Woah, before you're wanting to start ww3 biff hang on
I do agree completley with what's said above, just clean it up and crack on - do it all the time.
I just went by what that stupid niceic best practice guide says ( had it handy ) It says in their, like i said - terminations or connections have no or damaged barriers and enclosures.- That's what i'd interpet the OP's picutre as, connections damaged...even surface. Always have interpeted as that...shoot me down in flames then biff, i know you're dieing too
I hope the auspicious organisation that is the NICEIC don't write these guides for ships!!!
It'd be full for C1s for everything.
Reply to Opinions please..... in the UK Electrical Forum area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 855
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 975
Similar threads
- Article
CRM SOFTWARE - your opinions on the best few brands please Hi Everyone,
I currently use E-Works CRM software and feels it does have good...
- plumb_know
- Plumbers Forums
- 0
- 358
- Question
There could also be a completely unsuitable junction box embedded within the wall and tiled over or just cables in choc blocks in old accessory...
- Broadway21
- UK Electrical Forum
- 6
- 984
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Xmas lightsAgree with Littlespark, Plus althought it's marked C E, that's not the E.U approval symbol...- Latest: snowhead
-
Song words.Wizzard - See My Baby Jive View: https://www.youtube.com/watch?v=dPSZJ3xH5sA- Latest: bj the dj
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)It's a cold morning in Sheffield. My job today should be a quickie. I should be out of here by...- Latest: Moley
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.