Search results | Page 9

Search results

You will need 50 posts under your account before joining in with this thread because you can't link out without 50 posts first.

  1. ImpededLoop

    Odd LED floodlight problem

    No, there's nothing like that which would affect one and not the other. My only thought is that it could be something to do with inrush current, but I can't back it up with any facts! :)
  2. ImpededLoop

    Odd LED floodlight problem

    I'm pretty sure it's a relay as I think the PIR makes an audible click noise when it activates. I will double check though, thank you.
  3. ImpededLoop

    Odd LED floodlight problem

    The PIR is working as it should though, as is the 30W floodlight.
  4. ImpededLoop

    Odd LED floodlight problem

    A couple of months ago I installed two LED floodlights. One is 10W, the other is 30W. They are both connected to the same PIR and each light is no more than 400mm from the PIR. Everything works when installed, but within a few days the 10W floodlight stops working. I've replaced it four times...
  5. ImpededLoop

    Switched Sockets Cheaper?

    Likely to be due to volumes being sold with the unswitched being less common.
  6. ImpededLoop

    Wireless contacter for boiler enable

    Try RF Solutions.
  7. ImpededLoop

    Head Scratcher Time.

    Did you test by using the plugtop lead on your tester? Could be plugtop and socket don't quite make contact as well as whatever appliance is normally plugged in there. Have you tested from the back of the offending sockets?
  8. ImpededLoop

    Head Scratcher Time.

    Figure of eight ring? The "ring" nearest the cu is sound, the rn in the other part of the figure of eight is incomplete. Try measuring r1, rn, r2 from behind the sockets where you're getting odd results.
  9. ImpededLoop

    Anyone use click mode switches?

    From the back, the modules look very similar to the old MEM Delta range. I presume that Scolmore bought the pattern from MEM/Eaton.
  10. ImpededLoop

    Calculate this. Just got this letter emailed to me...

    If the meter has already been changed to a half hourly meter, you should be able to scroll through the different screens, one of which will be maximum demand. Consider any winter or seasonal loads that may increase the maximum demand from what has already been measured.
  11. ImpededLoop

    PME supply query (and bulk out the title)

    It's likely to all belong to the DNO up-to and including the meter outside each flat. The Henley board at the intake would normally be sealed.
  12. ImpededLoop

    TNCS High ZE at origin

    You'd be best to go back to site and have a look. If you're unsure, take a few pictures and post them on here. Let us know the outcome either way.
  13. ImpededLoop

    Outdoor socket flush with the ground in the garden

    The manufacturers instructions are likely to prohibit it. Also they normally require the accessory to be mounted vertically, not laid on its back.
  14. ImpededLoop

    Check my wiring diagram

    Looks good. The plumber will want the fused connection unit next to the boiler in case you get asked about that. Well done for taking the time to figure it out and draw it.
  15. ImpededLoop

    Remote Start/Em Stop button for generator issue

    Could you give us some more details. What make is the unit, wiring diagrams etc.
  16. ImpededLoop

    Electrician Jobs Switch for entire lighting circuit?

    Sorry I'd missed the bit about 2 circuits! :)
  17. ImpededLoop

    Electrician Jobs Switch for entire lighting circuit?

    Sorry, I missed the final paragraph of the OP which stated two circuits. I wouldn't put two circuits across a DP switch either! There could be advantages to having two separate switches so not all of the lights have to be isolated at once. It could be done with 2 grid switches on one plate.
  18. ImpededLoop

    Electrician Jobs Switch for entire lighting circuit?

    Why use a contractor? A 20A DP switch would be sufficient.
  19. ImpededLoop

    Going self employed while still paye

    You can be self employed and employed at the same time. I don't think it'll affect your PAYE tax code which is the only thing that your employer might notice if it changes.
  20. ImpededLoop

    New Consumer Unit Installation - L&N Reverse at the sockets

    It is potentially dangerous and despite the pressing appointment it should have been rectified before the electrician left. Were all of the circuits (lights, immersion, cooker etc) tested? What did the tester look like that he used? We all have bad days, but I'm surprised that the problem is...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top