What I would do is run 2xtwin coaxes and 1xsingle coax to main tv position from a central position/loft, run a twin coax and single coax to each additional tv point. Also run a cat 5 or a couple to each tv point from hub/router position This would make It adaptable for traditional TV, sky, sky...
If four down lights are going to sufficient to light the room it can’t be very big? If that’s the case it would probably cost less than £100 to put a suspended ceiling in, if you can do the work yourself..
If you use hue lamps on any outside lighting then you can use the geolocation on the app so they come on when your a certain distance from the house. I would avoid any fitting that goes in the ground. Under cupboard lighting using LED strip, down lights set 600-700mm/at edge of worktop to avoid...
Low level lighting in the en-suite on a sensor so turns on when you go in for a whizz during the night, Bluetooth speaker, mirror with demister pad, wifi booster, Internet points at TV position, Phillips hue lamps in selected locations, smart heating controls, electric blinds, 2 way switching at...
The immersion has nothing to do with the two port valve. You need to work through the sequence of switching....programmer when calling for heat sends power to the cylinder thermostat, the cylinder thermostat then sends power to the brown of the two port valve if it’s calling for heat, the two...
The OP says their friend has had an EICR done and that he’s had a look and they are indeed metal covers. So it strongly suggests that the OP hasn’t done the EICR himself.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc