Search results | Page 6

Search results

  1. lurch

    Hi Ze at distribution board, how would you approach?

    Agree with all those that state advise dno to rectify but hypothetically or technically what is the difference of a tt System with zs readings sub 200 ohms? Edit to say c/w 30ma rcd
  2. lurch

    Condensation issue in airing cupbd

    ah! good point. always good to hear other view points!! Thanks
  3. lurch

    Condensation issue in airing cupbd

    I know where your coming from, but did check and could not see a leak. I'm thinking outside of cap is exposed to cold air and inside the cap is warm air from element. Also thinking that under normal circumstances any condensation would be burnt of by hot element in cap. Because the power was...
  4. lurch

    Condensation issue in airing cupbd

    Hi. Havent been on forum for some time. Ive been in the industry for some years, and came across a scenario that I had not seen before. Got a call from landlord saying immersion heater not working. On inspection the thermal overload had tripped on the thermostat. Reset the trip and bingo...
  5. lurch

    Retrofit lugs

    Andy 78 - no defo no lugs. RG - that's the beggers!! Thx for response.
  6. lurch

    Retrofit lugs

    Guys. I have a strange one here where I have some existing single boxes in the wall all plastered in, with pvc conduit installed, an absolute dream to re-wire, however these boxes do not have any lugs fitted. I seem to remember in my fading memory there was a "yoke" that could be fitted...
  7. lurch

    Merlin Gerin SPNX

    Apparently they stopped production of these 7-8 years ago, so I'm looking for ex stock or 2nd hand
  8. lurch

    Merlin Gerin SPNX

    Does anyone know where I can get a 16a or 20 a merlinb Gerin SPNX mcb from. I have scoured fleabay with no joy. Thx in advance.
  9. lurch

    what testing package?

    any more ????
  10. lurch

    Unbelievable dressing!

    not that difficust with a bit of planning. dunno what the big deal is.
  11. lurch

    what testing package?

    Hi All I am looking at various testing certificate packages - PIRform, Castlime, Amtech and iCertifi. I am beginning to err iCertifi but would appreciate any feedback on any of the packages pro's and cons. Thx in advance. Ton
  12. lurch

    electric gates with intercom

    hi thanks for feedback. FYI I have not spec'd the system out just installing the gates openers/closures. on completion the gate company will commission and sign off.
  13. lurch

    Complex motor start cuasing RCBO to trip problem

    had a similar issue in reataurant. CU had a RCD and MCBs. Any nuisance tripping was knocking the RCD and whole restaurant out. I removed the RCD and replaced the MCBS for RCBO's. Every time the pump for the bar kicked in the rcbo tripped. I was luvky enough to run an swa in and put on MCB...
  14. lurch

    electric gates with intercom

    beninca above ground openers. Comelit Ikall intercom. Just got limited experience with this stuff. I suppose its the interface between the openers and the intercom is the area I am alittle concerned with : http://www.beninca.com/uploads/info/aad3ca0c40b1793208802dceaf39dd6e49adf4eb.pdf...
  15. lurch

    electric gates with intercom

    Hi Guys Anybody out there with experience fitting electric gates with intercom door entry system? I have a system spec'd - but have no real experinece fitting this sort of setup. Any help appreciated. Lurch
  16. lurch

    Southampton/Hampshire Electricians - WARNING!

    bump, bump
  17. lurch

    Southampton/Hampshire Electricians - WARNING!

    Re: Spton/Hampshire Electricians - WARNING! ?? Directors name is Dean Palmer.
  18. lurch

    Southampton/Hampshire Electricians - WARNING!

    Just a warning to all Southampton Electricians to steer clear of Posh Windows in Hedge End, Southampton. I just been stung for a tidy sum from this outfit as they have gone into liquidation. There back up and running again under another Ltd Company still using the POsh name under a franchise...
  19. lurch

    Do I need an extractor fan in this bathroom?

    phew that was hard work
  20. lurch

    lighting design

    10m x 15m x 2.5 high. recessed modular fittings, lay in cieling tiles on exposed grid, expect 400 lux at desktop. rgds Tony

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top