Search results | Page 7

Search results

  1. R

    industrial report

    When it comes to all the control side of the wiring, surely I don't have to test all that. Only the 230/415V dist and final?
  2. R

    industrial report

    Cheers Howard, yes first big test job. I`m in Swansea. I1m sure ill have more questions
  3. R

    industrial report

    Hi guys, My customer has been asked by his insurance company that he needs his electrics checked to validate his insurance. Firstly as there was no exact terminology used, do you guys think that a full EICR is required with every cable tested with full range of tests captured in the full EICR...
  4. R

    Supply protective device?

    Hi Guys, when filling in this part of the form on an industrial EICR, would I have to contact the DNO for this info as the fuses are on the pole outside the sub station? Cheers
  5. R

    EICR Testing on Industrial, above 100A supply

    Hi guys, I`m looking for blank "schedule of inspections" forms for an industrial EICR but, why am I only getting this on the IET site. Form 7 Form No: …………../7 Page … of … CONDITION REPORT INSPECTION SCHEDULE FOR DOMESTIC AND SIMILAR PREMISES WITH UP TO 100 A SUPPLY Note: This form is suitable...
  6. R

    1st fix freesat

    Thanks mate. 1. what would my customer need back at the central distribution point? 2. What is the benefit of the FM + DAB on the plate. 3. If he wants just a point for freesat in the bedrooms then is it just a TV point or a sat point that needs installing.
  7. R

    1st fix freesat

    Hi guys, here is my scenario. My customer has a sky dish. I am going to do a total rewire where 2 rooms downstairs will need to be ready for Sky+ and 2nd downstairs room having multi room. Then the 3 bedrooms upstairs need to be 1st fixed for freesat. Am I right in saying that the 2 downstairs...
  8. R

    Ventilation requirements for kitchen and utility room extension?

    Hi guys, Is it mandatory to have extraction in the kitchen and utility on a new extension? I need a quick answer, otherwise I`d look it up in Part F. Cheers
  9. R

    3 phase Conveyor drum motor?

    What about the mechanical side of motor. That seems to be the issue here.
  10. R

    3 phase Conveyor drum motor?

    Any ideas where in South Wales or preferably Swansea area that would recon this with quick turn around times.
  11. R

    3 phase Conveyor drum motor?

    Sounds like a bag of spanners in the drum when turning the shaft. Roller length 597mm Roller diameter 215mm Shaft diameter 40mm Conveyor length 5.2m Speed about 0.2 meters per second 3phase No specs/ serial numbers on drum
  12. R

    3 phase Conveyor drum motor?

    Hi guys, anyone know where I can source a new 3 phase conveyor drum with quick deliver? thanks
  13. R

    Fault advice

    Evening guys, Been to a customer today to investigate a fault that they have had for over a year now. When the cooker/hob is on then they are getting a tingle on the taps and in the shower. didnt have much time today but can tell you that water pipes in bathroom and the boiler area are all...
  14. R

    Bt master location on rewire?

    Thanks for your input guys, I now know what I have to do. Advice much appreciated.
  15. R

    Bt master location on rewire?

    Best I give them a call I think guys
  16. R

    Bt master location on rewire?

    I have a meter thick exterior wall on this house, so are they gonna drill thru that and then chase to my box because it cant go on the front of house in the hallway.
  17. R

    Bt master location on rewire?

    Hi guys, I`m busy on a rewire. I am putting a telephone point in the living room an one in the master bedroom. To where are BT prepared to run the line from outside. Does it have to be on the front of house. Basically, have they got any "area`s/zones" on where sparks can in stall a wall box...
  18. R

    TV point question?

    Thanks for all your advice guys. Much appreciated, never stop learning :-) Thing I`ll go for the amp option due to location of the premises. Regards
  19. R

    TV point question?

    Thanks for reply guys, is there a difference in the type of cable u use and can any of you recommend an affordable ampifier ( job already priced, I`m doing a rewire ). If using an amplifier, do I also need a splitter? Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top