Electrical improver/mate required Manchester.
Must familiar with bracketry, galvanised conduit, tray and basket.
Please PM me for more details.
Thanks Paul
Thanks for all comments guys after another of stress manged to get it sorted late on this afternoon. Alot of favours called in and definitely owe a few drinks out.
I know precisely what your saying engineer54, personal choice the whole place would get re-wired now. In an ideal world I would switch off all affected circuits and condemn them. The client has agreed the work requires being done have put a 2-3 year plan into place starting in new year to...
I've thought about that steve, but I still won't get continuity of CPC to the end of each radial i'm already having to change the site from PME to T-T the place is a nightmare.
Hi Guys
I have some remedial works to do on a site with static caravans. They are all fed in 25 2c swa in radial's supply to supply all circuit protection is fine and the insulation resistance tests between L - N are fine. Problem lays with the armouring the have failed leaving very poor...
Cheers for all your comments not looking forward to talking to client tomorrow and explaining that all there supplies need changing to TT. Well bit of work for me.
The RCD covering the radials to the caravans is a 's' type RCD its a merlin gerin with integral isolation, and I have completed the work as Section 721 taking a earth rod directly to plug earth feeding the caravan with loop tested out at 56.6 ohm which being <200 ohms according to Table 41.5...
I've picked up some work doing maintenance on a caravan site. The caravan's are what I would class as static but are all fed via a small 30ma RCD protected enclosure onto a 16a single phase BS4343 socket which has to be 30ma protected because its less than 20A.
The supply is for 5 caravan on a...
I was considering starting installing solar PV as another side of my electrical contracting business. I'm a fully qualified electrician and have installed some domestic systems as a sub-contractor and currently on a 150kw system. Is it worth going on a week solar course, as it is not a...
I've recently joined the safe trader scheme for free with local council. I had a member of trading standards come round and speak to me and check my details. It was quite informative, i was given advice on scams that customers have been pulling on tradesmen in my local area. I wasn't to know...
Did a lot of aircon work whilst working overseas. Not really much involved on the service side. Pretty much clean the filters under a tap and dry them off. Get a set of manometers and add new gas in until at correct pressure level, making sure your using the correct gas.
Hi Guys
I've been looking to install CHP with a heating engineer friend of mine, as my step into sustainable technologies. Was wondering if anyone has been doing it and could offer advice. I've done my research and there doesn't seem much call for what looks like a good idea.
Paul
Alright guys
Went into my local B+Q to get some paint for my wife and B+Q are knocking out fully loaded Duel RCD 10 Ways C/W MCB's for £60.00. I grabbed a few can someone else go buy them all before joe public thinks it ok to install them at this price.
Paul
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc