Get on ebay and have a look for a new control panel ive replaced one on a dishwasher and saved buying a new machine and the board only cost 20 quid used (manufacture wanted 119.99 :omg_smile:! for a new board)
I am planning on getting a metrel mi300 from test meter in the next couple of weeks reason being the amount of BANG it packs compaired with more higher rated makes withing the next 200 pound upwards band, a few people on here seem to have one and have recomended it to me and others.
have a look at the weather proof enclosures ive seen a few places with them wired from them have plenty of room in for all the fanjango that goes with them.
The reply from napit after i asked about why they where not involved, didnt rely answer my question but raises a fair point why would they recreate what they already have got. "There are currently two electric safe registers, the one started by NAPIT is the electric safe register.co.uk this is...
Your best getting a spark in to look at your install and your requirements and then they will be able to come up with the best idea. but you wouldnt normaly install 2 rcds 1 down stream from another as you wouldnt get discrimination between the 2 (either could trip) i normaly only use one in the...
Thanks BluetoBits i agree very much with what you say about it not being such a bad thing and any steps towards having 1 body, name, logo what ever a customer can look for with an electrician much like gas safe is a good thing. I just hope a way can befound for it to be fully reputable and not...
So basicly anyone with Napit and Storma are stuffed, if this takes off and the public see it as like the gas register. Anyone not in will start lossing work as they are not on this register. Yet again fully competent hard working sparks are going to be bent further over the table! why there cant...
Hello Dan, if you are thinking of going down the self employed route and after a form of qualiforcation to prove your competencey without going back to college for a year and it costing you the earth you could consider napits certificate of compatence (fs1) you can normaly get this by completing...
Could anyone recommend a good tool bag mainly for hand tools and a drill where it has pockets for screwdrivers pliers and so on, am looking for some thing like the veto pro pack ot xxl but without the hefty price tag! Am sick of rummaging round for tools in the bottom of bags and tool boxes...
Am in the same sort of bout Dan desperate for moreexperience (although I was fortunate enough to get a couple of months earlierthis year) I am handy on the tools and was left on jobs to get on and stuff. WhatI need is more of the looking at the job pricing, working out best ways to dothings and...
I take it the E7 is for economy mode, does the meter switch this on and off through the tails when it comes in and out of E7? I hadnt put any though into how meters switch between economy 7 and the normal tarriff so didnt think this would be done via the use of switching tails just though the...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc