I'm a pretty competent DIYer and always try to follow the relevant IEE/IET regs.
Recently I ordered an LED bathroom cabinet from Amazon to replace an existing broken LED cabinet (the mirror was broken). The new cabinet is made out of aluminium, has LED bulbs in the glass on the front and a...
Hello everybody!
My kitchen is being decorated and i am planning to wire under cabinet lighting, which will be turned on and off from separate lighting switch. I would like to hear your advice, which is the best practice to wire under cabinet lights connected from switch?
I become across...
Afternoon guys quick question
It’s been a year after the kitchen has been competed and now I’m looking at doing led strip lights under the cabinets on the plynths.
on one side of the kitchen I only have available 2 cooker isolating switches that I wired in for the induction hob and the...
Hi,
I recently decided to add some undercabinet lights to some kitchen cabinets and bought 240v robus undercabinet spotlights, but upon installation I found that they all flickered slightly - not noticeable from a distance but definitely noticeable close up, especially when doing something on...
Please help, I have just purchased wifi TCP strip light for the kitchen (multi colour and dimmer )
With a plug.
I was really hoping to have them controlled via a 3 gang dimmer switch which controls other lights in the room.
The plug has a 12 v transformer built in so I’m guessing I can’t cut...
Hello I hope you are all well, can this fitting be used as an under cabinet light in a kitchen? I assume as its an LED fitting heat won't be an issue? Thanks Andi
https://www.toolstation.com/v-tac-led-weatherproof-fitting-ip65-6500k/p96140
I have 12v halogen lights under my kitchen units and the last one has now packed in. I want to replace with a led strip. The leds are 60pc /m 12v, 4.8w/m, 270/300 lumens/m and came with a miniature type jack plug but I didn’t buy the phone charger type plug to power them as there’s a transformer...
I have some old fluorescent 230v undercabinet t5 fixtures that are wired from junction boxes and operate from a single wall switch.Electrician will fit but i need to buy replacement.
Im very confused what would be a suitable replacement. Want them to operate and wire them in the same...
It might seem a simple question, but I have a meter cabinet with a SAFYBOX handle that I can't open. Online information seems to show a 3 point locking system behind the door, but no information on how the handle works. I've tried pulling, pushing, levering, sliding and yelling, but no luck...
Hi,
During these tricky times I decided I needed a drinks cabinet and so bought a vintage Beautility from Ebay. It looks great but the interior cabinet light doesn't function. It's supposed to come on when the door opens and the top of the cabinet puts pressure on the switch turning the light...
Anyone?
I normally use sycamore Sirius which are great but they’re too small for an upcoming retrofit job.
Need to be good quality 4000k. Around 2-3 watt ideally.
Hi,
I am trying to identify this cabinet, it has the trademark of BI Callendar's on the front and the lock on the door looks very 1950s. I have called out SSE and they say the wireing is dead and they think it belongs to BT. I am thiking more like old tramway or street lighting controls. Who...
My understanding is that metal cabinet needs to be grounded to the common or neutral 3 wire.
Questions:
When is 3 wire required and when 2?
Why are some plastic cabinets polarized 2 wire or 3 wire?
Why is this metal cabinet space heater that im try to fix, why its 2 wire and neither is...
Supply to a nice look compressor cabinet,for pumping up tyres.
16amp 230 v.
20amp rcbo supplying the plug & play unit.
Its outside ,does this require main protective bonding,personally I dont think so.
Its extraneous but not entering the building.
Hi all
Eicr being undertaken, what code if any would you consider for this scinario
Small bathroom in a flat, with airing cupboard inside, no room for immersion and pump spurs (looks like spurs was inside airing cupboard at one point but cupboard has been made smaller to enlarge bathroom and...
Been asked to supply 13a sockets to 2 positions round a sports facility. The expected load is small, but the length of cable run is fairly long. I’ll probably be using 10mm2 2core with the swa as cpc.
They have had problems with kids etc gaining access after hours and fiddling with things etc...
What's the best way to present a couple of cables coming out of plastered wall to Bathroom cabinet. The cabinet is just supplied with some chocolate block to connect lights & shaver socket.
I'm running cables in plastic trunking but not happy with just having cable sticking out of tiles when...
Hi guys
Doing my kitchen and want to put the led strips under the cabinets and also the kick boards. Any recommendations for any? The one for the kick boards would need to fit round a u shape so would ideally be flexible to bend round.
Cheers guys
Got a customer who's wanting a washing machine and tumble dryer in the bathroom.
Normally the solution is to hard wire into FSUs but he's come up with the solution of kitchen units and a work top with the sockets in the void between the wall and the back of the units.
Could this be argued to...
I have an end off loop lighting circuit. 6 ceiling down lights from 1 switch (pic 1). I would like to add 3 additional cabinet lights to the same circuit of of the same single switch. Can I spur the cabinet lights from existing downlights (pic 2) or will they need to be added to the series (pic...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc