Hi, I live in a house that has been converted into three flats. Each flat has a circuit breaker box, but there doesn't appear to be one for the communal lights. We have an issue with the communal lights being permanently on (because of a faulty timer switch). Is it normal for there to be no...
Hi everyone
I am doing level3 design andI have a circuit to design but I have confusion with radia circuit maximum floor area to understand?
I have a socket to feed on the design and floor area according to my knowledge is Length multiply width so in that case it exceeds 75 m square so I am...
I need to replace an old FC005 5amp fuse holding switch with snapped switch due to old plastic.
Having trouble finding one and hope someone out there has a box of them somewhere I may be able to buy.
If you could advise on what could replace it if not that would be great.
I've a 10 yr old Neff combination oven (B6447N0GB /05) that failed recently, and I can't get a replacement component. I found a brand new oven - exactly the same model and revision - I thought I was sorted, but it arrived damaged :( So now I have two ovens, and hoping to make a working oven...
It might be easier to list the few things right with it. I have noted what appears to be burnt or frayed hot wires. I have only seen the pictures provided but this looks less than professional to me. The house is 1957 construction and may have aluminum wiring (probable cause for the burnt...
video explaining/showing problem
View: https://youtu.be/VjtsPzzZYrQ
this is a eaton cutler hammer circuit breaker. The house was built in 1969 but the breaker was upgraded to this eaton 9 years ago when i bought it.
House uses mostly older outlets that are 2 prong, not 3 prong. HOuse does...
Hello,
I have a flat/apartment in a building as described in the subject. I am wondering what to do about the current and additional outlets to have them be safe for kids.
The options:
-Replace fuse box with circuit breakers
-Run ground wiring and connect it to neutral at the junction boxes...
I finished framing my bathroom and wired an outlet and switch. I want to connect a 20 amp circuit breaker to the panel. I know the black hot wire is connected to the circuit breaker and it snaps into the panel. Does the ground and nuetral wire connect to the bar on the left? I see there is a mix...
Hi, I'm just curious about what will happen if I use an MCB lower than the calculated current rating. I have a 1kVA 220v stepdown to 110V transformer, calculated downstream MCB current rating would be 11.3625 if i'm right I multiplied the secondary current to 125%? what will happen if I use a...
Hello all. I´m installing a new multi split Air Conditioning (Inverter Type) in my dwelling and I have to purchase all of the electrical parts needed for the installer. I am currently running a 63a Type-A RCCB and I was told by the electrician that I could use the Type-A with a 16a Type-C MCB...
i have being using my multometer 4023 model on my mcb and its reading 309.3A but to my calculations it should be below 4 amperos
can anyone lend me a 320A fuse would be delightful
Morning All,
Having spent many years gleaning information from you all as a non member I've finally needed to join because, try as I might, I just can't find the answer to this puzzle, so here goes.
I've just installed, replaced really, a TP sub board that's being fed from a Crabtree 60A STD...
I have underfloor heating rated at 3kW. The circuit goes through a fused switch with a 13A fuse in it. That is supplied directly from the main fuse box with a B16 circuit breaker dedicated to that circuit alone. Every time we use the system, it warms up for a bit, then the circuit breaker goes...
Dear all,
I recently bought a new under counter belling bi70fp oven. 4.5kw at 240v. I have a circuit breaker on the main switchboard for the oven at 40Amps. I was told this needs changing to a 20Amps.
The specification on the oven stated 32Amps.
I am confused to the advice. What is the...
Hi Guys!I have question,why is the E.L.C.B connected outside the resistance area of any parallel path to the earth?
And also I would need the full wiring diagram of the E.L.C.B if anyone has an access to it.Thank you
On return from holiday, I discovered the circuit breaker had tripped out on my fuse board. Its an old board with only one circuit breaker. Trying to reset failed and it tripped again. This also happened two days before I went away, but on that occasion the trip could be reset. The fuse board...
Good Morning,
Was wondering if anyone can help me out. I am looking for the following type of circuit breaker for a customer of ours. Have looked into modern replacements but can't find any suitable ones so it's looking more likely that we need a direct replacement.
What we are after is the...
Hi there
I was told that domestic Wylex NB05 mini circuit breaker (pictures attached) is obsolete. Can someone advise me please if it would be safe to use similar NB05 breaker, which has following differences:
- the old one does not have any type. The replacement is Type2.-
- the old caries...
Hello, this morning I was having a shower with really really hot water. Shower lasts at least 15 minutes... at the end shower circuit breaker tripped.
It does not work any more, when I try to switch it on, it does not "keep the position".
I have a brand new circuit breaker, bought some time ago...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc