circuit | Page 7

circuit

Recent contents View information Top users
  1. lozarus

    Melted my brain thinking about EIC for a circuit on a submain...

    Apologies if this is in the wrong section - appreciate it's more of an educational question. That said I have 2391 - but the classroom environment is very different to out there in the field and I'm only really starting out in my inspection & testing journey - so please understand if this seems...
  2. A

    Can Wylex plug-in MCB be tripped by anything but overcurrent/short circuit?

    Hello, I have an old 16A Wylex SK type B plug-in breaker in the fuse box in my garage which keeps tripping, and every time (and only at that time) the 32A one of the same type supplying the whole garage in my home's main box also trips. It isn't happening fast, sometimes it takes days to happen...
  3. P

    Length of a 20 amp circuit run

    Hi there. I am a DIYer and am located in Ontario, Canada. I would like to put in a dedicated 20 amp circuit into my attached garage for my 15 amp table saw. The circuit will only have one tool on it at a time (the lights and existing outlets are on their own 15 amp circuits and will be left in...
  4. M

    Tricky Starter Circuit Question - 2001 Toyota Celica...

    I have an interesting starter circuit issue on a 2001 Toyota Celica (that won't start). If I have the starter out and have the main positive wire connected, then, run a jumper wire to the solenoid directly, if the starter is grounded to the engine, vehicle fans come on etc. when I set the...
  5. B

    UK SMEG Opera A3 120cm after 15 mins trips circuit breaker

    Hi guys, 5 year old SMEG Opera A3 120cm Dual Oven. Small Oven RHS... Works perfectly OK... Large Oven LHS.... After 15 mins trips the RCD on Consumer Unit. Replaced circular element at rear. Replaced large element on top. Problem still exists. Any advice... Tank you in Advance....
  6. M

    DIY how to wire new circuit breaker to new switch and recessed LED lights?

    I recently installed a new 15amp circuit breaker, and wired a 14-2 gauge wire to a brand new dimmer switch. From the dimmer switch I daisy chain wired 6 LED recessed lights. When I turned on the circuit breaker the lights all turned on, but the switch wasn't working. I then changed the switch to...
  7. brongochungus

    Cooker circuit tripping out with no appliances on it. Not immediately tripping.

    Even if the cooker and the plug is turned off it still trips after about an hour. It doesn't immediately trip out but it usually always turns back off after an hour or two, it doesn't immediately trip out. Do you think I need a new plug? Can a device plugged into another circuit trip a different...
  8. P

    Is 8awg ok to use for a branch circuit (30amp leg) ?

    I wanted to ask if 8awg (stranded) was safe to use for residential? I am wanting to run a branch circuit from my main panel to the garage (about 15ft away) into subpanel. Actually it's a 70amp Eaton 2circuit loadcenter. I dont have anymore room in my current Main panel so Ive read on here how...
  9. W

    GFCI in Closet keep tripping, found it was tied to overhead lighting circuit. Normal?

    Hello all! Newer house, original owner(Florida). no change to electrical system. Just found there was an outlet (GFCI) in the closet so I wanted to put a paper shredder in there but it didn't work because the GFCI was tripped. Would not reset so I changed it out, new GFCI will not set either. IN...
  10. Steve10001

    Circuit breaker weirdness.

    So yesterday one of tge circuit breakers tripped and wouldn't turn back on. Removed it completely and it still tripped even with no power. .bought a new one today and installed it, however, if I flip to switch all the way up ti the On position, it only gives out 3v. If I move the switch...
  11. E

    Tool used to detect all wires gauge on a circuit?

    I have a breaker that keeps popping when we turn on the Christmas lights. I know the lights don’t have much draw however they are on the same circuit as a reef tank which does have a large draw from a 4000gph pump as well as other filters and pumps. I wanted to upgrade the 15 amp to a 20 amp. I...
  12. E

    wire two 30 amp inlets into same bypass panel?

    Can I wire two 30 amp inlets into the same bypass circuit panel? I want to have an inside and outside inlet.
  13. B

    L-N short circuit MCB not tripping

    Hi all, I’m hoping you can shed some light on a problem I found. Please be gentle, I’m an industrial spark, not a domestic spark. I’ve been asked to look at a family members electrics as they are renovating a room. A cowboy spark has been in and messed the job up. I was asked to come in and...
  14. D

    Need dedicated circuit for water heater, range, dryer?

    Someone wants me to put a water heater(30 amps), range(40-50 amps) and dryer(30 amps) all on a single 60 amp circuit. I said that's a bad idea. They have a 100 amp main panel and all these devices would total 100 amps minimum. I am hesitant to run all these off the 100 amp service even with...
  15. jjustinia11

    Can I convert a 30amp sub panel to a regular 120 circuit?

    Hi All, I am new to the forum. I have a small 30 amp sub panel that once powered a green house, some lights and 1 regular 120-v outlet. We have since removed the greenhouse and it's associated wiring and now the sub panel is an eye sore and in an unsafe location as it is low, at outet...
  16. D

    UK domestic lighting circuit. - What the........

    About me. Fastidious about wiring. Degree in Mechanical Engineering, extremely good spanner monkey (rebuilt engines, gear boxes). BUT I know my limits and what I am allowed to do according to Part P of the UK building regs etc. Just been in the loft to do some tidying and found a right rats...
  17. I

    Dedicated circuit for immersion heater

    Hi, I know it's best practice to run an immersion on a dedicated circuit but am I OK with the following A new heat pump is being fitted and it has a wiring centre in the airing cupboard next to the cylinder, the wiring centre requires a 3A switched spur to power the circuit board a diverter...
  18. D

    Advice on using lighting circuit to power cctv (12v/3A)

    Hi All, so I have a outdoor cctv camera that you plug in - I'm thinking of attaching this to the soffit and going into the loft from there (very easy access). Can I just wire this into the lighting circuit, I've already done some work in the loft for various lights and an extractor fan so I...
  19. S

    Why my circuit breaker is tripping.

    Hi everyone, no sure this question should be in this forum, but im sure a lot of you will know the answer. I've set up a hot box to deliver food in my van. I've put a leisure battery 130ah and a inverter of 1000w continuous 2000w peak. between the battery and the inverter i've put a 100A circuit...
  20. V

    I am allowed to replace the 2.5mm wire from a radial circuit to 4mm and the 16Amp MCB for a 32Amp

    Could you tell me please if I am allowed in England to replace by myself the 2.5mm cable from a radial circuit to 4mm and the 16Amp MCB it has now for a 32Amp?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top