circuits | Page 9

circuits

Recent contents View information Top users
  1. D

    Distribution circuits

    Good Morning I have a series of Henley blocks suppling db’s. Henly block are protected by an bs88 63amp fuse. We have a 2.5mm 6181y cable feeding a isolator which in turns feeds a fire alarm panel, this 2.5mm cable is around 0.5 metre long and within the fire alarm isolator, there is a 20amp...
  2. L

    Advice ref blinking lights all circuits

    Hi there, I should start by saying I am not an electrician, but am after some advice as we have a problem that we aren’t getting any answers on. In January, we had a new fuse board installed to replace an old edition one. This is a recent Wylex model with circuit breakers. The electricians...
  3. andysparkfree

    100ma 100amp 3phase main switch on TT system and rcd protection on the rest of the circuits question

    Hi all , my question for your brilliant minds is (ill first set the scene) 35mm 4 core swa coming from an external supply, 16mm earth ran out to an earth rod(ze at the distribution board main switch 0.35ohms) now this is quite a large installation with a 3phase distribution board in the...
  4. G

    Domestic favour, tripping RCD and redundant circuits

    I have been asked to look into a random tripping RCD. The installation is quite simple, now only only four circuits, None RCD protected side has only the lights and a redundant 16A MCB 2.5mm radial for which no accessory could be found, possibly disconnected outside lights but the circuit was...
  5. W

    IR test on lighting circuits

    whilst carrying out EICR I usually find it near impossible to disconnect all loads ( on lighting especially) I there fore only carry out IR on Line and neutral to Earth. However, when I see most other certs, they claim to have recieved 299 ohms on live to neutral? Am I missing a trick, or am I...
  6. P

    2 gang light switch on seperate circuits?

    As per the title is there technically an issue with having a 2 gang light switch with one switch on the lighting circuit and the other on a ring circuit (via an FCU). The ceiling light is on the light circuit and the wall lights are on the ring circuit. This isn't something I would personally...
  7. D

    Identifying circuits on equipment

    Quick one..is it in the regs to identify where circuits are fed from on sockets and switches or just good practice? Commercial job obviously. Cheers
  8. I

    Short circuits calculator (IEC 60909) for Android

    Friends, I need help with my app testing. Can I put my app link (Google Play) here? Free, no ads. This application (fault currents and voltages calculator) can be used for the following calculations: - three-phase fault current (IEC 60909); - two-phase without earth connection fault current...
  9. Dozer 73

    NEW circuits into non amm3 DB. ?????

    If I was to wire an extension on a house , and the DB does not meet amendment 3 , where do I stand adding new circuits into this DB , is it ok or should it be changed to Amm 3 DB Know I should know the answer to this but hey ho were not all perfect
  10. Gavin John Hyde

    Parallel earth path between 2 circuits

    I have a ring circuit (circuit 1) and a light circuit (circuit2) in a flat im working on and i have somewhere in the walls or ceiling a joined earth path. From what i have seen there is no obvious metal conduit, so it seems its either the ventilation system that is fed by the same ring and goes...
  11. Jymbob

    Isolation of lighting circuits?

    Me again, with another question which I fear will become more common as Smart Home technology becomes more popular. Lighting isolation: is it a requirement to have a switch which breaks the live circuit close to the light? Background: I've got some smart bulbs which I can turn 'on' and 'off'...
  12. P

    Kitchen Socket Circuits??

    Thoughts please... probably heard it all before ;-) At some point I will be having a new kitchen fitted and I am going to be carrying out all the electrical works and any advice on the modern wiring methods of today would be appreciated. I'm used to the old wiring methods, where it was about...
  13. Dave Jenkins

    3 gang, Two-way Light Switch has two circuits

    Ey up, Did a quote for re-wiring a kitchen. That was straightforward enough but the client wanted replacement dimmer switches fitting to an existing 3 gang, light switch. OK, easy enough, but he's had an extension to the back of the house providing a large dining area off the kitchen. Whoever...
  14. Spunkywads26

    Borrowed Neutral across Lighting Circuits

    I've go a situation where a property has 3 lighting circuits: Downstairs Ltg Upstairs Ltg Rear Downstairs Extension I've discovered that the landing light is fed via the ground floor lighting circuit but has a borrowed neutral from the upstairs circuit. I wanted to separate these on the...
  15. T

    Lighting Circuits......

    Without going into calculations, at what length of the main run from the D.B. on a lighting circuit do you get a gut feeling that it needs to be upgraded from 1.5 to 2.5 cable more referring to singles than T & E. 6/10A type C mcb LED lighting low design current so more of a V.D max loop etc.
  16. D

    Extending Circuits for a side extension

    Hi, I have been asked to price for a side extension which will contain a utility room, office, few down lights etc. The house was rewired by another firm 18 months ago, with all the correct paperwork etc and completely renovated. A RFC and lighting circuit have been installed and terminated in...
  17. D

    Extending Circuits for a side extension

    Hi, I have been asked to price for a side extension which will contain a utility room, office, few down lights etc. The house was rewired by another firm 18 months ago, with all the correct paperwork etc and completely renovated. A RFC and lighting circuit have been installed and terminated...
  18. H

    Common live wire for three circuits

    Hi, Hoping someone can help me with a lighting circuit challenge. I have an existing two gang switch, with one 2C&E cable for a simple circuit and one 3C&E for a two-way circuit (using conventional 3 control wiring). It's an older property but pretty conventional loop-in loop-out radial...
  19. SparkyChick

    Testing off-peak circuits during on-peak period

    Hi chaps, Just wanted to gather some feedback about this topic. To give it some context, yesterday I went to sort out why one storage heater in a property was on all the time. 24 hour board + Economy 7 board. History of the circuit... small bedroom had a convector heater removed and replaced...
  20. D

    SY cable for distribution circuits and final circuits

    Hi all, Just a question relating to SY cable and the use of SY cable. My boss his carrying out a EICR for a industrial premise and coming across a lot of SY cable. These cables are used for final circuits and distribution circuits. I know that BS7671 list SY cable as non - standard cables and...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top