Hello all, in need of some advice. I have just installed 14 downlights (two circuits of 6 and 8) in what used to be a living room and dining room - the wall has been knocked down in between the two and rsj put in. I have wired for 2 gang two way switching at either end, so either side of the...
Hi, I've read a few threads about buzzing dimmers on here but still have a query and would like some advice please.;
Customer has x4 low voltage downlights with electronic transformers for halogen lamps fitted to each downlight. These transformers are 60VA each (Saxby model ET60T-R 20-60VA...
Can anybody advise on the following.
Have 4 5w led gu10 bulbs with a v pro series dimmer rated for low wattage lamps. The bulbs are dimmable but when the dimmer is switched on as soon as it is turned down the bulbs flicker badly.
Any advice appreciated.
Has anyone had problems with Varilight V-Pro grid dimmers?
I've had enough, installation so far has cost me 4 call-outs (unpaid) and now I'm upset to keep annoying my customer, it will probably cost me another £100 in parts to swap out the Varilight and replace with (probably) MK...
What is the reason that a dimmer makes R1+R2 readings so high when still connected in lighting circuits?
I may be missing the obvious but is it anything to do with Back EMF?
Just a quickie. Does anyone make plastic 2G boxes - 45/47mm with conduit knock outs? My local CEF, EC and Eddies can't help :( I've done a rewire in conduit and the customer wanted a dimmer switch fitting. The MK dimmer is very chunky!
Hi guys
Does any of you know much about LEDs and dimmers. Got a guy that wants these fancy LEDs from various suppliers all on dimmers and in grid switch. I know MK do dimmers so was heading towards the MK gridswitch. I was told by my supplier that you need to get the dimmer for that specific...
Hi All,
I'm in the midst of planning the re-wire of my new garage, and amongst this there will be some garden lighting that will need to be done.
What I'm hoping to do is to have a pair of PIR's on a switch circuit to control the LED lighting I'll be installing, but I'm trying to be fancy, and...
Hello. I'm a bit confused with the electrics on an industrial unit I'm leasing.
Ideally I'm after 3 phase - there is 3 phase coming into the building (with a 3 phase fuse box), but the previous owners wanted single phase and created a single phase set up from one of the 3 phases.
Here's a pic...
good evening Ladies and Gents.
A, lets say, 'friend of mine' has fitted a 25mm 1g box to house three grid modules (Two LED dimmers and a standard switch), the crazy dude thought he had seen a 3 module grid set up somewhere so never thought to check it out during first fix !!
However, my...
Hi,
I'm doing a complete house refurb including re-wiring. We would like dimmable LEDs downlighters throughout the house.
We've thought of getting - Mains LEDs in all rooms, except the bathrooms where they should be low voltage.
I want decent spec items that aren't top of the range, but are...
Hi everyone
first post so please bear with me. I have been to a very large house today, with a lighting circuit above the ceiling wired in 1.5 t+e. the two switches that are old retractable dimmers wired in what appears to be very close to bell wire. Next to the consumer unit there appears to...
Well......
Take a peek at these pics boys:
The cover was nearly off on this...its a dedicated cooker feed and none of the cables were terminated....yep, its still energised....
Found this CPC out of the earth bar upon pre-board change inspection...turns out theres 55 volts sitting on...
Hello,
I have just replaced 6 GU10 Halogen bulbs with 6 Megaman LED 6W GU10 Dimming Bulbs (at great expense).
They work fine but don't seem to dim. Looking on the Megaman site and generally around there is some suggestion I need a new dimmer switch. I have a std looking MK switch which the...
Hi Just replaced 6 GU1O (incandescent) lamps with 4.5 watt L.E.Ds and replaced Dimmer for Aurora dimmer (L.E.D compatible) does not seem to be as liquid as GU10s used to be although ok. My next customer is an ---- mother and wanted to know if anyone knows of better (dimmer)product for 8 x 6 watt...
recently finished 1st fixing of large house, wired bathrooms usual way, switch outside the door and fan isolator up high, fan switched to come on with light, usual way, now they tell me they want dimmers on bathroom lights, if I put dimmer in now it will be operating fan also, unless of course...
Anyone know of led dimmers out there that work.
I have a trailing edge dimmer 20va. Doesn't operate 9x 4.5 watt ge lighting LEDs. (40.5w)
so less than half way and it becomes unstable switching off 2 or 3 LEDs completely. The dimmer I have is varilight pro.
Is there a dimmer that has smaller...
Hi all.
Simply put: Looking at changing standard 50w MR16 lamps with 7w Warm white MR16 LED's
Existing transformers are Aurora AU-PD60 20-60W/VA Electronic Transformer
Existing Light switches are Lutron Rania single channel (non LED compatible)
Have any of you had past experiences running MR16...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc