Hello all,
I have been asked to look at a job involving installing a intercom/door entry for a small commercial wharehouse/office
At the moment they have metal/glass door like the ones on most high street shops (not automatic) open and closed by key
I was going to put a coded panel in to...
Hi guys iv got a indutrial roller shutter door at work which will only go up about 2 meters and stops in the same position everytime when you push the up but it will not go any higher but can be lowered n re hightened to the same position and cuts out. Does anybody have an idea what this could...
re my weekend project that I'm doing. I've first fixed for a burglar alarm system. Front of house is all glass including the door, so basically a normal door contact is a no no.
In this situations would a beam in the hallway be possible? The idea being as and when front door opens inwards it...
Morning All
Fitted for a customer a while back a door entry alert with laser beam detection.
Cost well over £100, but has now failed.
Not an off the shelf item at wholesaler so bit of a pain to take back/ spare parts etc.
Want to replace with a lower cost option, that would be easy to...
Hi......I have just had delivered 4 sills/scuff plates Which have leds in all 4. I also have a separate cable with 4 plugs on it which obviously connect to the 4 sill plates.
My question is where do I wire the end of cable too......I presume the drivers footwell lights? Is so what wire goes...
hi forum,
i am new to this site and this is my first question
i am seeking advice on troubleshooting problems on a ISM C2000 digital door entry system
are they any members, who have worked on this system or similar, who can offer any practical information or troubleshooting tips
having read...
hi guys, as a well established electrical contractor carrying out all types of electrical work we have never undertaken door entry/access works, any tenders that have included this we always have subbied it out.
as we never have undertaken these works we are obviously not as skilled/clued up as...
Hi All
I have door entry system that i installed at a care home. it is a fail safe system but they didnt ask me to coonect to fire alarm system unitl after i had second fixed it all.
Long story short i have connected it (through a relay) to a local fire alarm sounder that gives out 24v on...
Hi guys, got a bit of an issue at work trying to install akey switch for a shutter door. The door is operating on a retractive switch with two lives and a neutral. When pressing either up or down, both lives are activated. My question is, how does the switch tell the door which direction to go in?
Are any of the wireless ones to be recommended? All I've ever heard of them is negative, but a school I do work for needs one to cover one door and it would be the simplest solution.
They have the usual entry system with comms and coded keys, but the need a bell/buzzer for one door. It's for an...
Hello chaps and chappettes.
Got a 2 way intercom system to install, just for the handset not using the door lock bit.
My question is that the Landlord wants something pretty damn solid to prevent vandals kicking the carp out of it. I suggested mounting it around 5ft up to make it harder to...
My mind has gone blank and cant seem to grasp the solution.
At the moment there is an existing door entry system in place and on the main door is an electronic lock release which can be opened externally via a fob or internally via handset button within the flats which energises the lock...
Hi everyone.
I have had a request to fit a door alarm system. Basically client needs a buzzer fitted within an office that will operate when either the front or back door opens at night time only.
I have a general idea of fitting 2x door magnets, when door opens buzzer activates, psu fed by...
I moved a door entry phone in an office as the staff were moving to another part of the building, everything works apart from the lock wont open, I used 80 mtrs of 3 pair telephone cable to extend it, its a Bell system, can anyone help
I live in a flat which has a buzzer to let people in. Recently I noticed than when i turned the buzzer to privacy later it would have turned back on gain by itself.
I changed my bathroom light a while back from a "4 pin 16watt 2D fitting" with a smaller style 2 pin 16watt fitting due to the...
not sure but is that the limit switches that i am pointing out , company says the door needs a new motor , when i try and open the door that unit keeps buzzing and flashing , would a faulty motor cause it to do that or could it just be that unit thats faulty
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc