Old style board must be 15 years old.
Needed to remedy EICR failure. Cash waiting for sensible offer.
Ripped out loads of these in the past too, sod's law!
Cheers!
Hi,
Ive got a couple of KLIK marshalling boxes, the KLDS6 versions, i am trying to wire them to supply 6x down lights but struggling with the circuit diagram. i have a switched line, neutral and earth where the old pendant is, no loop, how do i wire that to bring all the lights on, thanks
Hi all, towards the back end of last year we installed a new modular building to be used as a village hall. The spec required split metering, (power on one meter, lighting on the other). so we fitted a hager split metered TP&N DB. Recently the clients have had their electric bill stating they...
quoting for some electrical work and need to install a new circuit, and there is one way free on a Hager cartridge fuse consumer unit.
Not sure of the model but it is a unit, where the cartridge fuse is accessed by pulling out and down the front cover of each circuit breaker, and the fuse is...
Hi,
This morning in my local wholesalers they had a selection of the latest Hager metal consumer units that comply with amendment 3. I have to say I was quite impressed with the look of them, especially the Design 30.
Hi im currently been carrying out at periodic on a caravan park. the board is a hager with these massive mccbs. There are 16mm cables which feed onto caravan outlets and the mccbs are all rated at 125A's... I dont see why this has been done and dont think its acceptable, surely the biggest...
Having a clear out got the following for sale as a job lot
MEM AB32SB 32A M6 TYPE B 4 OFF
MEM AB06SB 6A M6 TYPE B 1 OFF
MEM AB16S2 16A M6 TYPE B 1 OFF
HAGER BS3871 16A TYPE 2 1 OFF
HAGER BS60898 32A B 2 OFF
HAGER BS60898 6A B 1 OFF
PROTEK BS 60898 16A B 2 OFF
PROTEK BS60898 32A B 2 OFF
PROTEK...
Hi,
whats the general consensus on using an RCD as a main swich?
I had to add another board today for a car charger, basically the current installation had no space left and the customer and charge point supplier said put another board in just for that, which is what I was going to do anyway...
Scenario
There is a bank of 6 light fitting with two tubes in each (58w floursent T8 tubes controlled by one 2x58 watt ballast) they are plug connected in each fitting and each fitting is protected by a 3 amp fuse. The 6 fittings are fed from a canalist (sorry if this is not correct...
Hi,
I was discussing the Hager BC818CU 24 Modules 18 Way board on here last night, I Have just spoken with Hager about this and they say...
Three neutral bars
The main neutral bar which feeds the RCD's has 14 slots / screw holes
The second for the first RCD has 10 slots
The third has 9 slots...
Hi all,
Fitted a Hager Invicta 3 8 way TP board, and in the couple of weeks since fitting it the builders chucked the box away with all the DB stickers in! Anyone know where I can get replacement stickers?
Ta.
Been having a sort out and have the following MCBS to clear
British General All new
6 32A type B
1 40A Type B
Hager old style without the plastic flap
Used
6 32A Type B
Protek
Look New
2 32A Type B
2 6A type B
All 75p each plus postage
Hi guys
Does anyone know if the old Hager boards with the 1361 fuses will take a RCBO and if so what type ?
I have found Hager RCBOs but not sure if they are compatible.
Thanks to any replies in advance.
I need to find a main switch to fit an MCCB board. There is no writing or stickers on the board.
All I know it that the breakers in it are Hager H125Ds
Can anyone shine any light on this?
Thanks
I have nearly always used MK consumer units but recently started using a new supplier who doesnt stock MK.. They said they have Hager boards but im not sure about them, last time I one them was about 10-12 years ago and didnt like it.
From what I remember the cover was very flimsy, the plastic...
hi all,
Domestic installation question
I have an Hager split board, left hand controlled by an RCD.
100 A Main switch
RCD 63a, with upstairs and downstairs sockets 32a, 1 x 16a sockets all type C, there is also 1 x type B 20a MTN 120 for sockets.
The type B has two T&E cables, both ending...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc