Went to quote for new electrical shower and they want to upgrade from 8.5 to 9.8kw. (I am a plumber boooh boooh) anyway, the cable is 10mm but the rcd is 40amp. I cant find a 45amp rcd its either a 40 amp, 50 amp or 63 amp!! can I use 50 amp? I will get an electrician in but just want to know if...
Got a house divided into 3 flats.
3 phase supply but don't want to get a 3 phase board as the smallest is 12 ways (SP) when I only need 4 ways (SP).
Seen a hager enclosure that will take a 3 phase incomer and using a 3 phase busbar I could fit the necessary MCBs/RCBOs. Trouble is that I...
Hi Guys
Hager's Consumer Unit Guide to the 17th Edition makes the statements on page 11
According to BS 5839, circuits supplying fire or smoke alarms in
dwellings can be protected by an RCD provided that either:
i. The RCD serves only that circuit. For example with the use of an
RCBO
ii...
Hi all, just fitted my first hager board 5+5, have not fitted a 17th edition one before, went onto BG and wylex, thought I would try a hager as fed up with wylex and what a great board with great feature's and excellent quality, must say well done hager. What do you all think of them?
I fitted a hager consumer unit about 2 years ago for a firm i used to work for and they gave me a module that was a rechargeable light that comes on with a powercut and that can also be removed and used as a torch. i have been trying to source one but cannot find one anywhere? any clues?
...no supp bonding or rcd on lighting circuits in bathrooms. C2 i said. According to esc pdf guide!! Easy fix, spare three ways in 16th ed hager board. Busbar is long enough. Install rcd.
Wondering if i can get any hager one to replace pictured are sizes universal?
I thought save money and...
Hi folks, not sure if this is on the correct forum or whether it should be on the general forum but here goes anyway! I use hager accessories & consumer units. I like them a lot & they're a reasonable price compared to mk & Schneider! What are your thoughts on accessories as in the best for...
Hi guys, I have a load of Hager Klik Plugs for sale, both standard 3-Pin and 4-Pin plugs. I have them listed with Best Offer option, the greater the bulk buy the lower the best offer I shall accept.
Based in Southampton but can ship nationwide.
3-Pins: 10 x HAGER KLIK LIGHTING PLUG IN, 3 PIN...
I've been asked to install 2 electric showers. That's the easy bit. The client has asked me if I can install a timer so they will only run for a maximum 10 minutes. Is this possible? The reason is to stop the kids spending hours in the shower and save on energy.
Hi all,
I fitted a new Hager CU about a year and a half ago for a neighbour in our area, and all was fine, although the people who live in the flat are very odd and not very bright to be generous ! anyways the board has the split 30mA Rcd's one each side and type B MCB's after them.
I have...
Hi.. I have for sale if anyone is interested a HAGER H3 63Amp MCCB x160 (400/415) 3POLE.
Bought for a job and never used. The RRP is approx £190. I will sell for £50 just to get it out of the way.
I live in the north london area or i can post. My email is: [email protected]
Thanks,
Hey all.
been called to job for PIR, one of the problems is the cable entry on top of the db board has not been done tidy and is not that old.
the board is a 3 phase , but 16mm armoured cable hasnt been glanded or anything but has just been dropped through the gap in the top of the board...
A client has a bloody loud (solenoid clicks and also a progressively high whining sound which makes it sound as if it's about to go off pop!) hager contactor switching his underfloor heating (primary heat source for whole flat - all on one stat - do what?!) It is a 40a 3NO contactor. ES 340 is...
Hi all, just filling out some paperwork from an inspection a couple of weeks ago and just noticed that a x5 reading is 76.4 and x1 is 28.4-not sure if I've misplaced a decimal point or what.. Going to go back and recheck it tomorrow- how can x5 be higher?
Hi,
Looking to source some RCBOs in UK as part of a re-wire here in Gran Canaria (will be done by a retired UK electrician). Looking for good price and performance (happy to pay more for better quality - but not just for a name). Can you experts recommend makes and suitable suppliers. Thanks.
NEED A EXPERTS KNOWLEDGE ON THIS QUESTION
HAGER TEBIS LIGHTING NOT WORKING
TEBIS COUNTROLER ONE (digital light switch )
1 LIGHT WORKING
2 LIGHT NO FUNCTION
3 LIGHT WORKING
i do not have the software can i override this by pressing the over ride button on the breaker. any help is appreciated.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc