voltage across neutral and earth on immersion heater.
Have check element for R 18.7 ohms checked contunity all ok check stat all ok remove flex and check voltage all ok when reconnect to immersion heater i get voltage across l-e n-e no voltage across l-n?
How's about this for a bit of shocking workmanship!!! I was called out to this today and to say I am furious is a understatement. This is a 6kw immersion heater on a Local authority site. Electrical works should only be carried out by qualified / accredited electrical contractors! How many...
Morning Chaps...
Customer of mine has had a new cylinder recently installed (6 months ago.)
All electric heating/ economy 7.
Has 2 immersions : off peak at bottom & boost at top
They've never used boost. Eco7 permanently turned on.
No hot water the other day so advised to use boost...
A friend of mine is moving into a house with a three phase supply. Now..
Picture this:
It's summer and it's daytime. There's nothing on but the radio. Lunch rolls round and the homeowner whacks the cooker on.
Is the excessive Neutral current/wasted electricity something to worry about...
Anyone recommend a time clock that can take the output of a 5kw immersion element? Without using a contactor
Biggest time clock I can see is 16a resistive load
Hi guys if anyone could help me out here I would really appreciate it. I've got to wired up a immersion heater. There is a switched fused spur mounted on the outside of the cupboard housing said immersion heater from this is a piece of flexed which need to be wired in. On top of the immersion...
Hi,
I'm quoting to wire up a dual immersion. The plan is to change the existing 16a mcb to a 32a rcbo and running 4mm cable to an enclosure with 2x 16a mcbs but my question is on a timer for it. Can I get a 32a timer or would it just be cheaper to put 2 on for each immersion.
Oh it's not a...
The inlaws have had british gas round to install one of their wireless thermostat and a UP2 duel channel programmer for controlling the hot water and heating, and here in lays a potential problem.
Their fuse board is an old wylex job with 3036 semi enclosed ceramic rewirable fuses and lately...
x4cs
Thread
central
central heating
circuit
controls
heater
heating
heating controls
immersion
lighting
question
their
wiring
Ok posted a thread the other day but am still trying to see if there is a possible solution to my problem. Here goes
Got a fault economy 7 unit hortsmann e7bx unit. This has 10 connections in it. It's has a supply from the off peak board and the standard consumer unit. Both board have a rcd...
marco86
Thread
advice
going
heating
immersion
other
standard
switch
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc