meter tails | Page 2

meter tails

Recent contents View information Top users
  1. T

    Tri rated meter tails or flexible meter tails

    Hi everyone, Bought some Flexi meter tailes from a supplier today , Am I going crazy or that I marked up incorrect . The Flexi tiles I’m used to has 19 strands of copper or similar, opposed to the normal six or seven. The ones I’ve got today, Looked like finally stranded wire, at least 200...
  2. T

    Running meter tails outside in trunking

    Hi everyone, hope you’re all doing well. Got a job starting next week for a rewire of a studio flat, currently they have 10 mm T&E as metre tails , So definitely got to be an upgrade. The existing meter box is situated outside ( under cover ) the bathroom wall , On the right hand side of the...
  3. A

    Meter tails over 3m

    Hi Guys Just some advice required. I understand meter tails ideally at 3m from meter but is it possible to have meter tails 10-15m from the meter? Came across a job where there's no real option but to have the consumer unit 10-15m from meter cut out. If it is possible is additional...
  4. Kuba

    Meter tails size

    What is the size of these meter tails? Are L&N going to the meter 32mm or 25mm and coming out are 25mm or 16mm? Permitiers are roughly 40mm of larger one and 35mm of smaller one. Thanks for your help ?
  5. A

    Meter tails >3 metres in length

    Hi Has anybody ever found where this "rule has come from"? In the NAPIT codebreakers book it quotes "ESQCR regs" but it is not actually written in there. If it is a DNO rule then it comes under their regs (ESQCR), but as I said, it is not in there....
  6. BigSpark

    1.5mm meter tails

    Evening All, I attended a job today to disconnect an Alarm System at a ground floor flat. On taking the consumer unit front off, discovered the incoming neutral tail to be 11 x 1.5mm single core cables which needless to say aren't all tight and secure in terminals. The incoming line looks to be...
  7. E

    Meter tails in ceiling ?

    Hi all, I am moving a CU from next to the meter to about 1.5 meters away on an adjacent wall. Am I OK to run the meter tails through the ceiling void between the joists (plasterboard ceiling) to the new CU position or is a case of installing an isolator and 25mm swa? Many thanks
  8. Weezy

    UK RCD protection to Meter Tails?

    About 20Meters of 25mm meter tails are routed though the floor boards feeding a sub main. To protect the tails under the floor i was going to fit a Mini Metal Unit with RCD protection Fused at 50A at the mains position, Just wanted to check to ensure it’s a 30ma ‘S Type’ RCD i need? As the c.u...
  9. D

    Meter Tails, recessed box

    Hi all, Waiting for a bashing here, but it's something I haven't had to do until now so looking for advice on the best way to approach this. I've been asked to replace a consumer unit for a customer but the existing meter box is recessed in the exterior wall - not uncommon I know, but not...
  10. S

    Protection of Meter Tails and Length

    Good Afternoon All, I have just completed a Periodic test on a house and have a question about the meter tails. The house is 14 years old so has 25mm meter tails. The CU is in the garage and the meter box is around 7m away on an external wall as you'd expect. Looking at it, I imagine that the...
  11. W

    Mechanical protection for meter tails

    Does anyone know if there is a product for protecting mains tails in walls apart from conduit? In sure ive seen stainless steel capping or something similiar that can be earthed and is drill bit resistant?
  12. C

    25mm Meter Tails

    Afternoon, Quick question. I’ve been to a job earlier to find a fault, but this connection was at the main switch. The first set of tails come from the meter and the second set are down to another duel RCD board. Looks doggers. Checked the Schneider manufacturing instructions and I was...
  13. B

    Meter tails over 3m

    Hi all, Just doing a newbuild where the DB will be about 8m from the cut out/meter box. 25mm tails run in conduit on the surface of the outside wall then direct through the wall to the DB inside the house. DNO have provided a (non-fused) isolator in the meter cupboard after their 100A cut out...
  14. P

    Meter tails from outside??

    Evening chaps First fixing a new build this week I’ve got a dilemma I’ve not come across before, the meter box is outside and the consumer unit is to go in the garage it’s on the same wall about 1.5m away but the meter cupboard is outside on faced brickwork and the consumer is inside the garage...
  15. A

    3 core armoured cable to meter tails

    Hello, There is a 3 core underground armoured cable that emerges into a small "plant" room and from there it will connect to the consumer unit which is a fair distance and inside the property. A previous electrician (left when coronavirus) has already run meter tails between plant room and...
  16. P

    Twin and earth used as meter tails

    So i went to a job and i came across this the house is 19yrs old and apparently this is how it was when they moved in from when it was built its the twin and earth that runs to the consumer unit I am looking at there is some 10mm earth to the gas meter that has been fitted at a later date.
  17. S

    SWA instead of meter tails

    Hi Gents, Hope everyone doing good at this hard time,i need your opinion guys I am installing new CU and Client ask me to install it somewhere roughly 6 meters away from meter box. i have decided run SWA as i can not use 3m meter tails in this case but my questions are; 1.Can i run SWA through...
  18. E

    Meter Tails in Cavity - Horizontal Run

    We've just recently bought a property which is around 25 years old and will be completing some alterations. The consumer unit is in the Utility high up on the wall. Isn't in the ideal place and we'd like to move it, due to a new kitchen layout. On further investigation the meter tails run up...
  19. G

    Splitting 25mm meter tails to SWA and 25mm tails

    Hi All, I need to split the meter tails to supply a second CU which will be at the rear of the house, however the supply to the second CU will need to be in SWA and I can only split the tails at the meter cupboard. Is there a suitable adaptable box or isolator I could use to be able to do...
  20. E

    UK What would you suggest?

    Hi guys, got a job that tested out lovely so that's good, my issue is the Cu has been moved previously, the tails (25mm) are in the wall less than 50mm (from incoming to cu) with no rcd protection, I suggested downgrading 100a main fuse to 60a, and running a 16mm swa along the same route...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top