minor | Page 3

minor

Recent contents View information Top users
  1. gazdkw82

    Minor works testing questions

    Job is to install a spur of a RFC. Once installed I will issue minor works as should be done. However, I was thinking, the r1+r2 value reading/test, is that from the spurred point or from the board? Also another job I have is to replace some floor sockets that have been damaged. Sockets are on...
  2. G

    Can i issue a Minor works certificate

    Having recently passed Domestic installers exams but not having set up a business or not yet working for an electrician, if i do some minor work for a family member, can i issue them with a Minor Works certificate i.e. with no company name on the document?
  3. S

    Minor Work Certificate

    Good afternoon all, Just newly qualified, so not registered with recognised body to do self certs. So having new kitchen fitted, and existing sockets in old cupboards just needed fitting into new cupboards. Fitter insisted that he needed a MWC so another sparky fitted sockets and raised MWC...
  4. Kasper

    minor works certificate

    Hi there, just trying to find out some info regarding the issue of a minor works cert. Having recently completed the 2395 course, I can carry out periodics, but wondered if I can issue a minor works cert or whether I have to wait until I have done my 2394 course ? Many thanks :)
  5. S

    RCD Requirements minor works

    Interested in fellow sparks opinions on this. Client of a 15-20year old commercial/Industrial premises wants an additional 13a socket outlet installed for a specific piece of equipment, the additional wiring for this will be off a current non-rcd ring (with satisfactory Zs value) and installed...
  6. 8

    Minor works, fixed dwelling with commando input.

    Hi gents, I'm working on a container thats is ply lined and has lighting and power inside all run in plastic 20mm surface conduit. Protective device is a garage 2-way consumer unit with 30ma rcd main switch (already installed on arrival). The container is in middle of a field on a mod site -...
  7. leep82

    Minor Works testing advice

    hi all, currently doing an office refurb and are ready to reinstate switch drops that were removed to allow walls to be taken down. The wiring is all T&E into klik plug in boxes above the ceiling. Currently having a discussion on site with another electrician about how we go about doing our...
  8. Spunkywads26

    Minor Works Cert & Bonding

    Hi All, me again. I quoted a small job in a landlords house. The CU is located in a cupboard under the staircase and has rammed with the tenants rubbish. I asked the landlord what type of CU was in there and he told me it was replaced 2 years ago for an RCD board. I moved abit of stuff and...
  9. ipd1961

    Meter Change, Minor Works Certificate required?

    I wonder if I can have any guidance on this issue. In a commercial building we look after they have the old type of meters to check the usage by the occupiers. We have been instructed to change them to a "Smart" type of meter which will be connected to our BMS to accurately record usage, peaks...
  10. M

    Certification. Minor works and EIC or one or the other

    I was talking to a fellow spark today and he said I have gone about this wrong. But I disagree so I would like your opinions. Been out to a property with and old rewirable fuse board. (I don't know what that's defined as). They had a spur out the back feeding a disconnected 2.5mm T&E feed in...
  11. R

    Minor Works cert

    Hi, I have been in discussion with a friend Regards minor works certs for a couple of jobs he did recently. 1. Move light (cable is not extended just moved 300mm using slack in loft) 2. Change single socket to a double socket. He has insisted he is not altering the circuit and that it is...
  12. P

    What electrical work am I allowed to do as an unqualified homeowner?

    Hi Guys, Hope this is in the correct section. I just recently discovered that I am technically not allowed to install an extractor fan despite being outside of the special zones and would need an electrician to fit so they test and issue certificates. Now I have found clear information on what...
  13. drzsta

    RCD needed With minor works?

    Hi, Just a few questions as I rarely do any domestic work. I'll be changing a few single sockets to doubles and also adding a few extras on the existing ring. Currently has no RCD protection and common sense suggest that because I'll be adding sockets I should add RCD protection? Downlights...
  14. uksparks

    Minor Predicament over RFC Length

    Hi, I have just started a new build today, its a large U shaped bungalow with vaulted ceilings etc. I have split the property down into a lot of circuits to help with things due to cable runs etc. I have just wired a section of it today, I was going to do it all in 4mm radials, but by the...
  15. FatAlan

    Fill me in please!

    What fillers do folks find easiest to use for filling in around minor works like chiselling into walls for back boxes etc?
  16. D

    Which certificate

    I've got a small office which was connected to a B32 MCB, inside the office it had a 2kW heater, 58W luminaire and 2 x double sockets. The sockets and heater have been removed, just leaving the 58W luminaire. Replacing the supply MCB from B32 to B6, would this warrant a minor works or would...
  17. S

    Which cert

    Spur to outdoor socket..I know it's notifiable but do I issue minor works .or full e.i.c.....I'm think minor w orks ??????
  18. N

    Who can issue a Minor Works cert?

    I have been through a time served electrical apprenticeship, achieved LV 3 2330, AM2, NVQ, and all other stuff to do with, 6 years ago. I do not not have test and inspect. I have always worked for large contracting companies, in the cushy side (maintenance) and have never had to supply certs for...
  19. Golden Graeme

    Minor works cert

    On the report is the earth fault loop impedance internal Zs or external Ze ?
  20. O

    Minor works certified with no RCD protection

    Hi all. Got a query could do with a bit of advice off other sparks who are qualified supervisors. i am working for a company that is registered with the NICEIC. We are currently have a contract doing ecrs to properties as requested by client and then after that the properties are having boiler...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top