HI All
Need some advice. I had an electrician professionally install power to my garage. Here is how he did it.
Spurred off a socket on the ring main to a 13A fused switch. Then through the wall to a water proof junction box on other side of wall. Then waterproof cable along fence into garage...
Hi Guys, please can you give me some advice. We are having a rewire and the electrician has installed an outside light with the wire sticking out as shown in the image below. He said that there is no way to have the wire inside as it comes from the floor which is below the fitting. Is that...
You might want to turn the pic on its side, appoliges!
Here we have a diagram of outside lights. The 2.5 cable is coming from the C/U to the light outside then onto the switch. It's on its own circuit with nothing else added.
Theres a separate socket on the other side of the wall which has...
Hi. I have an outside porch light which has a switch just inside the hallway. I am adding 2 more outside lights to be switched on using that same switch. I have ran 1mm cable from the switch line and neutral & earth to the new light and continued that to the 2nd new light. When I switch the...
Can someone offer some advice please?
I would like to remove an old outside light fitting on a switch, currently wired as attached photo:
home - outside light
blue - blue
yellow/green - yellow/green
blue with brown sleeve - brown
three brown wires from home into their own terminal with no...
Hi,
I have removed a canopy from above my front door in preparation for a new door and glass panel being fitted. I’ve come across some very poor electrical work which I’ll need to tidy up. But to cut a long story short. The cable before to the outside light was run in the canopy then dropped...
Hi chaps
How would you best mount or connect into this light? It seems like it would be back entry but my cables would be coming from conduit or armoured from side. I know it's a pretty stupid question but what is neatest method
Hi
I'm replacing a PIR outside light with a new Dusk till Dawn light but have wiring questions. The new light has 2 connections, i.e. blue(neutral) and brown(live) but no earth. As can be seen in my image, for the existing light, there are 3 wires so I think the wires go:
1) black(old) goes to...
Hi, excuse the ignorance here but I am currently replacing an existing switch with a 2 gang to wire up a new outside light. The current switch has a live, neutral and earth feed as does the new outside light. How/can I wire this correctly? I presume I should bridge between the COM port but how...
Afternoon
i have changed hallway light double switch to a triple so I can add an outside light.
i have wired first switch for hallway
second switch is for landing which works both ways upstairs and down
so both work as normal.
so I have a third switch I would like to use as outside light but...
Hi All,
I was wondering if anyone could help me with a recent problem I’ve had on a job. About 5 months ago I installed about 5 outdoor soffit lights from switch inside. All worked perfectly and customer was happy. I’ve recently been called back to the job as the outdoor lights have been...
I have three way switch in my kitchen, with from left to right switch one turns on and off the PIR activated outdoor light, switch two turns on the hallway light and switch three turns on the main kitchen downlighters (though these can be turned on/off at other switches within the kitchen) What...
Hello, new member here with little elec knowledge and a mystery regarding our outside light. Our house is quite old and the wiring is, shall we say, non-standard. We replaced the old light a few weeks ago. It worked fine but was old. There was an indoor switch for it just inside the back door...
Hi guys
Wanting to put an 8 watt led light fitting outside ,
Only place I can get a supply from is kitchen ring main got a radial approx 4th long.
now issue is the radial is already feeding combination boiler and a single socket for washing machine. If I put additional spur in for outside...
hi all
I have just bought two new spotlights and the existing has live, live 1, earth and neutral, but the new lights have live, earth and neutral.
Can the 4 connections go into 3?
Two spotlights, sensor triggered and switch in kitchen (mains connected.)
Hello!
I've put up a mains outside light,
Been working fine for about 2 weeks,
Now it's not working!
When I turn it on and off at the mains, the bulb flashes once like a camera, and doesn't light up.
I've checked all wiring connections in the light and the plug,
Everything is connected.
Left it...
I’ve replaced a porch light today it’s fed by a fused spur. But when you turn the fused spur on the light stays on permanently.
I can upload pictures of the light and also the fused spur.
How do folks wire in a PIR controlled light with an over ride? Is it a case of fitting a completely seperate PIR and controlling from two switches .. one permanent live on and off and one to PIR? Any neater switching methods?
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc